2 layers71.9 × 58.4 mm
Atmega32u4 hub pcb 1 3
Accessible-AAC/AAC-Devices
Augmentative and alternative communications device design files based on inexpensive and open source technologies.
65 parts3
2 layers95.5 × 35 mm
Nubkey module tester
palette-system/nubkey_module5This is a module that allows Nubkey using a magnetic switch to be used in the same communication as PIM447.
- Size
- 95.5 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 11
- Pads
- 57
- Tracks, vias
- 52, 0
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Jun 2024
- Updated
- 16 Jun 2024
Overview
Nubkey module tester is an open-source printed circuit board by palette-system, from the palette-system/nubkey_module repository on GitHub, published under the MIT licence. It is a 2-layer board of 95.5 × 35 mm with 11 parts on 11 nets, routed with 52 tracks and 0 vias.
It is built around the PJ-320AS镀银环保. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
hardware/nubkey_module_tester/README.mdNUBKEY_MODULE TESTER
nubkey_module をテストする基板です。
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | address 0x0B, analog response | |
| 1 | KEY_HOLE | original:KEY_HOLE | KEY_HOLE |
| 1 | PJ320A | original:CON_PJ320A | PJ320A |
| 1 | ProMicro | original:ProMicro_v3 | U1 |
| 1 | SW_Push | kbd:ResetSW | RESET_SW1 |
| 1 | actuation | kbd:ResetSW | actuation |
| 1 | calibration | kbd:ResetSW | calibration |
| 1 | nubkey off | kbd:ResetSW | nubkey off |
| 1 | nubkey_module | original:nubkey_module | nubkey_module |
| 1 | writer | original:10pin | writer |
Questions
How big is the Nubkey module tester PCB?
It measures 95.5 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nubkey module tester use?
11 parts, built around the PJ-320AS镀银环保. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nubkey module tester KiCad files?
From the palette-system/nubkey_module repository on GitHub, at the commit this page was made from: the board is hardware/nubkey_module_tester/nubkey_module_tester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nubkey module tester design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers274 × 84 mm
- 2 layers58 × 103 mm
- 2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0 - 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915