
LM317regulador
Pacheco55/KICADex
Ejercicios y modulos PCB en kicad muchos hasta con archivo GERBER

Ejercicios y modulos PCB en kicad muchos hasta con archivo GERBER
Ejercicio1 is an open-source printed circuit board by Pacheco55, from the Pacheco55/KICADex repository on GitHub. It is a 2-layer board of 24.5 × 15.5 mm with 3 parts on 3 nets.
Its parts include 1 resistor and 1 diode.
Ejercicios y modulos PCB en kicad muchos hasta con archivo GERBER
¿Necesitas ayuda? ¡Estamos aquí para ti!
Reportar Bugs: Abre un issue en GitHub
Sugerencias: Discussions en el repositorio
Contacto: info@pixelbits.studio
PIXELBITS Studios Innovación en tecnología embebida
Pacheco 55 Arquitecto de software
Este proyecto está licenciado bajo la Licencia MIT - ver el archivo LICENSE para más detalles.
Si este proyecto te ha sido útil:
Dale una estrella al repositorio, compártelo con otros developers, déjanos tus comentarios y contribuye al proyecto.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 9V | Connector_PinSocket_2.54mm:PinSocket_2x01_P2.54mm_Vertical | BT1 |
| 1 | LED | LED_THT:LED_D5.0mm_FlatTop | D1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |

Pacheco55/KICADex
Ejercicios y modulos PCB en kicad muchos hasta con archivo GERBER

Pacheco55/KICADex
Ejercicios y modulos PCB en kicad muchos hasta con archivo GERBER


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️




hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
It measures 24.5 × 15.5 mm and has 2 copper layers, 1.6 mm thick.
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pacheco55/KICADex repository on GitHub, at the commit this page was made from: the board is ejercicio1/ejercicio1/ejercicio1.kicad_pcb and its schematic LM317regulador/LM317regulador.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pacheco55 before reusing the design.