2 layers20.5 × 24.8 mm
2 layers32 × 11.5 mm
Endstop
pablobacho/reprap-endstop1- Size
- 32 × 11.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 5
- Pads
- 16
- Tracks, vias
- 33, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 May 2017
- Updated
- 3 May 2017
Overview
Endstop is an open-source printed circuit board by pablobacho, from the pablobacho/reprap-endstop repository on GitHub. It is a 2-layer board of 32 × 11.5 mm with 8 parts on 5 nets, routed with 33 tracks and 0 vias.
Its parts include 2 resistors, 1 capacitor, 1 diode, 1 connector and 1 switch.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100n | Capacitors_SMD:C_0603 | C1 |
| 1 | 10K | Resistors_SMD:R_0603 | R1 |
| 1 | 1K | Resistors_SMD:R_0603 | R2 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mm | P1 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | LimitSwitch | e-switch:E-SWITCH_SS_LA | SW1 |
The 6 most common of 8 parts.
Questions
How big is the Endstop PCB?
It measures 32 × 11.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Endstop use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Endstop KiCad files?
From the pablobacho/reprap-endstop repository on GitHub, at the commit this page was made from: the board is endstop.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Endstop design in my own project?
Its repository states no licence, so its author keeps all rights: ask pablobacho before reusing the design.
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0