10 layers
6 layers50 × 50 mm
ProDocument ZYNQ7020 V1 2024-04-10
p8p671/ZYNQ_DEVBOARD- Size
- 50 × 50 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 353
- Pads
- 1,120
- Tracks, vias
- 7,379, 634
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 May 2024
- Updated
- 3 Jul 2024
Overview
ProDocument ZYNQ7020 V1 2024-04-10 is an open-source printed circuit board by p8p671, from the p8p671/ZYNQ_DEVBOARD repository on GitHub. It is a 6-layer board of 50 × 50 mm with 152 parts on 353 nets, routed with 7,379 tracks and 634 vias.
It is built around the SY8003ADFC, W25Q128JVEIQ and WS2812B-V5, with the X0802WVS-60AS-LPV01, 1125-1105G0Z087CR01 and DSHP02TSGET among its other parts. Its parts include 68 capacitors, 54 resistors, 10 ICs, 4 connectors and 4 inductors. It belongs with the FPGA and CPLD boards of this library.
Main components
6
SY8003ADFC
DFN-8(2x2)-40℃~+85℃@(TA) 1 1MHz 2.7V~5.5V 3A 55uA Adjustable Buck Buck Built-in Yes DFN-8(2x2) DC-DC Converters ROHSSilergy CorpDC-DC Converters
W25Q128JVEIQ
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 10uA 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(6x8) NOR FLASH ROHSWinbondNAND FLASH
WS2812B-V5
SMD5050-4P-40℃~+65℃ 0.6mA 1.57mm 2kHz 3.7V~5.3V 5mm 5mm 800Kbit/s G:520nm、B:471nm、R:621nm G:520nm、B:471nm、R:621nm R:310mcd、G:780mcd、B:215mcd SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
X0802WVS-60AS-LPV01
SMD,P=0.8mm-25℃~+85℃ 0.8mm 100V 2 500mA 60P Gold Phosphor bronze Surface Mount,Vertical SMD,P=0.8mm Board-to-Board and Backplane Connector ROHSXKB ConnectionBoard-To-Board And Backplane Connector
1125-1105G0Z087CR01
SMD,P=2.54mm,卧贴-40℃~+105℃ 1 1x5P 2.54mm 2.5mm 3A 5P 6mm Black Pin Header Surface Mount, Right Angle SMD,P=2.54mm,卧贴 Pin Headers ROHSWconPin Headers
DSHP02TSGET
SMD,P=1.27mm-40℃~+85℃ 1.27mm 2 3,000 Cycles Black SPST Slide, Recessed SMD,P=1.27mm DIP Switches ROHSDongGuan KINGTEK Industrial Co.,LTDDIP Switches
README
README.md| Part | Detail |
|---|---|
| CORE | XC7Z010/xc7Z020 |
| RAM | 512M*2 DDR3 |
| ROM | SPI NOR FLASH 128M/256M |
| Ether | -NA |
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 100nF | Capacitor_SMD:C_0805_2012Metric | C15, C16, C17, C18, C19, C23, C24, C25, C26, C30, C31, C32, C33, C34, C35, C36 +36 |
| 28 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R34, R36 +12 |
| 7 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R28, R30, R31, R32, R33, R75, R76 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C20, C21, C22, C44, C71, C73 |
| 6 | 49.9Ω | ProDocument_ZYNQ7020_V1_2024-04-10:RES-ARRAY-SMD_0402-8P-L2.0-W1.0-BL | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | 0R | ProProject_zynq_mini_pi_S_2024-04-08:R_0603 COPY | R50, R59, R60, R61 |
| 4 | 10K | Capacitor_SMD:C_0402_1005Metric | R35, R44, R51, R52 |
| 4 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_MD-2020 | L8, L9, L11, L12 |
| 4 | 200K | Capacitor_SMD:C_0402_1005Metric | R45, R47, R49, R54 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4, C27, C77, C78 |
| 4 | 47uF | ProProject_zynq_mini_pi_S_2024-04-08:CAP-SMD_L3.2-W1.6-RD_WU | C28, C29, C83, C86 |
| 4 | SY8003ADFC | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP1.05x1.75mm | U12, U13, U14, U15 |
| 3 | ~ | ProDocument_ZYNQ7020_V1_2024-04-10:LED_0603 | LED1, LED2, LED3 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C48 |
| 2 | 20kΩ | Resistor_SMD:R_0402_1005Metric | R73, R74 |
| 2 | MT41K256M16TW-107 IT:P | Package_BGA:Micron_FBGA-96_9x14mm_Layout9x16_P0.8mm | U5, U6 |
| 2 | X0802WVS-60AS-LPV01 | ProDocument_ZYNQ7020_V1_2024-04-10:CONN-SMD_60P-P0.80_XKB_X0802WVS-60ADS-LPV01 | CN1, CN2 |
| 1 | 100K | Capacitor_SMD:C_0402_1005Metric | R48 |
| 1 | 1125-1105G0Z087CR01 | ProDocument_ZYNQ7020_V1_2024-04-10:CONN-SMD_1125-1105G0Z087CR01 | CN3 |
| 1 | 133K | Capacitor_SMD:C_0402_1005Metric | R53 |
| 1 | 300K | Capacitor_SMD:C_0402_1005Metric | R46 |
| 1 | 44.2K | Capacitor_SMD:C_0402_1005Metric | R55 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 50MHz | ProDocument_ZYNQ7020_V1_2024-04-10:OSC-SMD_4P-L2.5-W2.0-BL | X2 |
| 1 | 50MHz | ProDocument_ZYNQ7020_V1_2024-04-10:OSC-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | DSHP02TSGET | ProDocument_ZYNQ7020_V1_2024-04-10:SW-SMD_4P_DSHP02TSGET | SW1 |
| 1 | W25Q128JVEIQ | ProDocument_ZYNQ7020_V1_2024-04-10:WSON-8_L6.0-W8.0-P1.27-BL-EP | U10 |
| 1 | WS2812B-V5 | ProDocument_ZYNQ7020_V1_2024-04-10:LED-SMD_4P-L5.0-W5.0-TL_WS2812B-B | U11 |
| 1 | ~ | ProProject_zynq_mini_pi_S_2024-04-08:FBGA-400_L17.0-W17.0-R20-C20-P0.80-TL | U7 |
| 1 | ~ | ProDocument_ZYNQ7020_V1_2024-04-10:WQFN-24_L4.0-W4.0-P0.50-TL-EP2.5 | U8 |
Questions
How big is the ProDocument ZYNQ7020 V1 2024-04-10 PCB?
It measures 50 × 50 mm and has 6 copper layers, 1.6 mm thick.
What parts does the ProDocument ZYNQ7020 V1 2024-04-10 use?
152 parts, built around the SY8003ADFC, W25Q128JVEIQ, WS2812B-V5 and X0802WVS-60AS-LPV01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProDocument ZYNQ7020 V1 2024-04-10 KiCad files?
From the p8p671/ZYNQ_DEVBOARD repository on GitHub, at the commit this page was made from: the board is XC7Z020-6/ProDocument_ZYNQ7020_V1_2024-04-10.kicad_pcb and its schematic XC7Z020-6/1_BANK34{slash}35.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProDocument ZYNQ7020 V1 2024-04-10 design in my own project?
Its repository states no licence, so its author keeps all rights: ask p8p671 before reusing the design.
Similar boards
- 10 layers90 × 60 mm
- 10 layers95.3 × 71.4 mm
- 4 layers100 × 80 mm
- 4 layers92.9 × 45 mm
Post box usb
google/myelin-acorn-electron-hardware
Phillip Pearson's retro hardware projects for the Acorn Electron
116 parts59Apache-2.0 - 2 layers140 × 140 mm
- 2 layers33.8 × 131 mm
SevenSegmentInputModule
cscott/SevenSegmentInputModule
7-segment display input module for Framework 16
86 parts2 - 2 layers115 × 75 mm
