
Uaefi
rusefi/uaefi
🔴Community support ONLY 🔴 https://www.facebook.com/groups/rusEfi 🔴 Discord🔴 Commercial Support 🔴

This is trying to be yet another HD ECU based on rusEFI.\ Commercial rusEFI based HD ECUs:\ https://www.nmstec.ca/product/hdrevb/ This seems to be the initial community development? https://impactwiringsolutions.com/…
Hellen bremen is an open-source printed circuit board by P4ulBr4ndt, from the P4ulBr4ndt/hellen-bremen repository on GitHub. It is a 4-layer board of 102 × 107 mm with 74 parts on 226 nets, routed with 857 tracks and 208 vias.
It is built around the RNBD451PE-I100, ISL9V3040D3ST and TLE9201SG, with the VNLD5160TR-E and DMN6040SK3-13-VB among its other parts. Its parts include 20 resistors, 17 capacitors, 6 transistors, 5 ICs and 3 diodes.
WIP. Untested.
This is trying to be yet another HD ECU based on rusEFI.
Commercial rusEFI based HD ECUs:
https://www.nmstec.ca/product/hdrevb/ This seems to be the initial community development?
https://impactwiringsolutions.com/ Commercial product
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6, R12, R13, R15, R16, R17, R18, R19, R20 |
| 10 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 5 | TestPoint_Probe | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4 |
| 3 | 470 | Resistor_SMD:R_0402_1005Metric | R7, R9, R10 |
| 3 | VNLD5160TR-E | VNLD5160TR-E:SO_160TR-E_STM | U2, U4, U7 |
| 2 | 0.1uF 10V | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R8, R11 |
| 2 | 4.7uF 10V | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | BUK9K52-60E,115 | BUK9K52-60E:BUK7K6R840E115 | Q5, Q6 |
| 2 | DMN6040SK3-13 | DMN6040SK3_13:D-PAK_DMN6040SK3-13_DIO | Q3, Q4 |
| 2 | ISL9V3040D3ST | ISL9V3040D3ST:TO-252AA_ONS | Q1, Q2 |
| 2 | Module-knock-0.2 | hellen_knock:knock | M5, M6 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | BLUE | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | LOGO | hellen-bremen:logo | G*** |
| 1 | LOGO | hellen-bremen:qrcode | G*** |
| 1 | LOGO | kicad6-libraries:LOGO | G*** |
| 1 | LOGO | hellen-bremen:bluetooth | G*** |
| 1 | Module-mega-mcu144-0.6 | 0.6:mega-mcu144 | M3 |
| 1 | Module-power_12and5V-0.2 | 0.2:power_12and5V | M2 |
| 1 | Module-stlink-0.1 | 0.1:stlink | M1 |
| 1 | Module-vr-max9924-0.1 | 0.3:vr-max9924 | M4 |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | RNBD451PE-I100 | RNBD451PE:MOD39_15p5X20p7X2p8_ZSX_MCH | U1 |
| 1 | RUSEFI_LOGO | kicad6-libraries:rusefi_logo | G*** |
| 1 | TLE9201SG | TLE9201SG:TLE9201SG | IC1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J3 |
| 1 | ~ | HD:HarleyDavidsonDelphi81 | J1 |

rusefi/uaefi
🔴Community support ONLY 🔴 https://www.facebook.com/groups/rusEfi 🔴 Discord🔴 Commercial Support 🔴


acanyulaf/24V-10A-BLDC-Driver
This is a technical assignment problem given by Kuartis. The aim is to design a 24V/10A BLDC controller. There will be also an I2C or SPI interface for control inputs.


ADVecu/Hellen-PROLT
A: .github/workflows/update-hellen-one-reference.yaml is set to pull latest hellen daily!

ozeromer1111/hellen-example
A: .github/workflows/update-hellen-one-reference.yaml is set to pull latest hellen daily!


It measures 102 × 107 mm and has 4 copper layers, 1.6 mm thick.
74 parts, built around the RNBD451PE-I100, ISL9V3040D3ST, TLE9201SG and VNLD5160TR-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the P4ulBr4ndt/hellen-bremen repository on GitHub, at the commit this page was made from: the board is hellenbremen.kicad_pcb and its schematic bluetooth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask P4ulBr4ndt before reusing the design.