2 layers254 × 134.6 mm
2 layers131 × 46.5 mm
Original pd pi001
owen-rp2a03/pcenginePC Engine system and perhipheral schematics and pcbs with a kicad library
- Size
- 131 × 46.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 30
- Pads
- 141
- Tracks, vias
- 743, 0
- Pours
- 49
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Sep 2026
- Updated
- 18 Sep 2026
Overview
Original pd pi001 is an open-source printed circuit board by owen-rp2a03, from the owen-rp2a03/pcengine repository on GitHub, published under the MIT licence. It is a 2-layer board of 131 × 46.5 mm with 47 parts on 30 nets, routed with 743 tracks and 0 vias.
It is built around the 74HC157D and 74LS163APC. Its parts include 17 resistors, 15 connectors, 10 switches, 3 capacitors and 2 ICs.
Main components
2
74HC157D
SO-16-40℃~+125℃ 10ns@6.0V,50pF 160uA 2V~6V 5.2mA 5.2mA 74HC 8/4 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers
74LS163APC
DIP-164 74LS Programmable divide ratio、Reset function、Cascade counter、Synchronous counting DIP-16 Counters, Dividers ROHSTexas InstrumentsCounters, Dividers
README
controllers/README.md
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Jumper_2_Bridged | PC_Engine:Jumper_Controller_7.5mm | J703, J704, J705, J706, J707, J708, J709, J710, J711, J712, J713, J714 |
| 10 | 47k | Resistor_SMD:R_1206_3216Metric | R701, R702, R703, R704, R705, R706, R707, R708, R709, R710 |
| 4 | 330 | Resistor_SMD:R_1206_3216Metric | R714, R715, R716, R717 |
| 3 | 680 | Resistor_SMD:R_1206_3216Metric | R711, R712, R713 |
| 2 | 10n | PC_Engine:C_Disc_Controller_5.0mm | C702, C703 |
| 2 | Jumper_2_Bridged | PC_Engine:Jumper_Controller_Optional_7.5mm | J701, J702 |
| 1 | 10u 16V | PC_Engine:CP_Controller_5.0mm | C701 |
| 1 | 74HC157 | Package_DIP:DIP-16_W7.62mm_LongPads | IC701 |
| 1 | 74LS163 | Package_DIP:DIP-16_W7.62mm_LongPads | IC702 |
| 1 | Cable | Connector_JST:JST_EH_S9B-EH_1x09_P2.50mm_Horizontal | CN701 |
| 1 | II_Turbo | PC_Engine:SW_Sliding_Surface_original | SW702 |
| 1 | I_Turbo | PC_Engine:SW_Sliding_Surface_original | SW701 |
| 1 | SWA | PC_Engine:SW_Controller_Pad_original | SW1 |
| 1 | SWB | PC_Engine:SW_Controller_Pad_original | SW2 |
| 1 | SWC | PC_Engine:SW_Controller_Pad_original | SW3 |
| 1 | SWD | PC_Engine:SW_Controller_Pad_original | SW4 |
| 1 | SWE | PC_Engine:SW_Controller_Pad_original | SW5 |
| 1 | SWF | PC_Engine:SW_Controller_Pad_original | SW6 |
| 1 | SWG | PC_Engine:SW_Controller_Pad_original | SW7 |
| 1 | SWH | PC_Engine:SW_Controller_Pad_original | SW8 |
Questions
How big is the Original pd pi001 PCB?
It measures 131 × 46.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Original pd pi001 use?
47 parts, built around the 74HC157D and 74LS163APC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Original pd pi001 KiCad files?
From the owen-rp2a03/pcengine repository on GitHub, at the commit this page was made from: the board is controllers/original_pd-pi001.kicad_pcb and its schematic controllers/original_pd-pi001.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Original pd pi001 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers
- 4 layers457.1 × 308 mm
- 2 layers244 × 244 mm
- 2 layers58.4 × 84.8 mm
C64NIKI2
ibaldachini/C64NIKI2
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
27 parts2 - 2 layers320 × 150 mm
- 4 layers236.8 × 240.9 mm
DIY Video
jimbro1000/DIY-Video
General purpose video system for 8-bit computers using 74LS logic
315 parts1 - 2 layers195 × 101.7 mm
