2 layers90 × 60 mm
2 layers18 × 25.7 mm
Fabriboard
Outdatedcandy92/Fabriboard- Size
- 18 × 25.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 36
- Pads
- 100
- Tracks, vias
- 264, 26
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Oct 2026
- Updated
- 28 Oct 2026
Overview
Fabriboard is an open-source printed circuit board by Outdatedcandy92, from the Outdatedcandy92/Fabriboard repository on GitHub. It is a 2-layer board of 18 × 25.7 mm with 16 parts on 36 nets, routed with 264 tracks and 26 vias.
It is built around the CH32X035G8U6 and ME6211C33M5G-N. Its parts include 5 capacitors, 4 connectors, 3 resistors, 2 ICs and 2 switches.
Main components
2
CH32X035G8U6
QFN-28(4X4)-40℃~+85℃ 12bit 20KB 27 3.3V、5V 32 Bit 48MHz 62KB Built-in FLASH RISC-V4C QFN-28(4X4) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 2 | BOOT | Easyeda2kicad:SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2, J3 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | CH32X035G8U6 | Package_DFN_QFN:WQFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm | U1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ME6211C33M5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Easyeda2kicad:USB-C-SMD_TYPE-C-16PIN-2MD-073 | J1 |
Questions
How big is the Fabriboard PCB?
It measures 18 × 25.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fabriboard use?
16 parts, built around the CH32X035G8U6 and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fabriboard KiCad files?
From the Outdatedcandy92/Fabriboard repository on GitHub, at the commit this page was made from: the board is fabriboard.kicad_pcb and its schematic fabriboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fabriboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Outdatedcandy92 before reusing the design.
Similar boards
- 8 layers50 × 50 mm
USB C PSU
LeoDJ/USB-C_PD_PSU
A 5-60V bidirectional buck-boost-converter, also capable of 240W USB PD EPR (48V 5A)
149 parts29 - 4 layers50 × 50 mm
Pdaltmode
AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035
88 parts10LGPL-2.1 - 2 layers62 × 100 mm
ESP32-S3-HUB75-Driver
wszeto9/ESP32-S3-HUB75-Driver
This board serves as the Matrix Display driver for MIT's 2.007 gameboards in Spring 2024 and Spring 2025. The board can take 4 button inputs, Stemma-QT I2C sensors, and breaks out 8 GPIO pins for future use.
137 parts3MIT - 6 layers65.3 × 65 mm
Fast computer condom
American-Embedded/isolated_reindvstrialize_usb_hub
This repository contains a KiCad project template provided by American Embedded. It is designed to be a starting point for new electronic designs, pre-configured with common settings, layers, and manufacturing outputs.
157 parts1CERN-OHL-P-2.0 - 2 layers27.3 × 40.1 mm
- 2 layers30 × 69 mm
- 4 layers107.1 × 32.4 mm
