Ostpopcorn/FlowerMonitorPCBBlommor is an open-source printed circuit board by Ostpopcorn, from the Ostpopcorn/FlowerMonitorPCB repository on GitHub. It is a 2-layer board of 100 × 100 mm with 83 parts on 60 nets, routed with 404 tracks and 42 vias.
It is built around the ESP32-WROOM-32, DHT11 and AMS1117-3.3, with the IPS021L and WS2812B among its other parts. Its parts include 24 resistors, 19 capacitors, 14 connectors, 5 ICs and 4 transistors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C5, C6, C7, C8, C11, C51, C52, C53, C102, C114, C115 |
| 6 | 10uF | Capacitor_SMD:CP_Elec_10x10.5 | C2, C4, C101, C111, C112, C113 |
| 6 | 220R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7, R8 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22, R102, R103, R108 |
| 5 | Conn_01x03_Female | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J101, J102, J103, J104, J105 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R51, R52, R55 |
| 3 | , , | ||
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53, R54, R56 |
| 3 | Conn_01x01_Female | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J51, J52, J53 |
| 3 | R100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R101, R104, R107 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2, SW3, SW4 |
| 2 | A1SHB | Package_TO_SOT_SMD:SOT-23 | Q2, Q101 |
| 2 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J55, J56 |
| 2 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R106 |
| 1 | 5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R105 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Adafruit_PAM8302_Breakout | special:Adafruit_PAM8302_Breakout | U102 |
| 1 | BST82-1 | Package_TO_SOT_SMD:SOT-23 | Q102 |
| 1 | Conn_01x02_Female | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J3 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J54 |
| 1 | D | Diode_THT:D_DO-15_P15.24mm_Horizontal | D1 |
| 1 | DHT11 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | U101 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | ESP_PROG_JTAG | Connector_Esp:SMT_ESP_PROG_JTAG_1.27 | J2 |
| 1 | ESP_PROG_UART | Connector_Esp:SMT_ESP_PROG_PROG_1.27 | J1 |
| 1 | FerriteBead | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | FB1 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | G*** | SymbolOST:ost-bubble_12mm_Copper | ost-bubble_12mm_Copper |
| 1 | IPS021L | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | MCP1700-3302E_SOT23 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | Motor_DC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | M1 |
| 1 | OSTSymbol | SymbolOST:ost-bubble_12mm_SilkScreen | SILKSCREEN1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D10 |
The 82 most common of 83 parts.
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
83 parts, built around the ESP32-WROOM-32, DHT11, AMS1117-3.3 and IPS021L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ostpopcorn/FlowerMonitorPCB repository on GitHub, at the commit this page was made from: the board is blommor.kicad_pcb and its schematic blommor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ostpopcorn before reusing the design.
advaithar-un/forestfire-prediction-reliability-withPCB
An ESP32-based forest fire detection system combining custom KiCad PCB hardware with machine learning for environmental monitoring and early fire-risk detection using temperature and humidity data.
KKK-Pro/ESP32-IoT-PCB-Design
🔷 Title ESP32 IoT Sensor PCB – Custom KiCad Design 🔷 Project Overview This project involves designing a custom two-layer PCB for an IoT sensor node using the ESP32-WROOM-32 module.
Mahesprabhu45/BLE_SENSOR_PCB
This repository features a PCB that I designed using KiCad and fully assembled, including component placement, soldering, routing validation, and hardware testing.
Sahil073/SIH_GLAH10_BrajCoders
This directory contains the schematic design, printed circuit board (PCB) layout, 3D renderings, and manufacturing guidelines for the Sanjeevni wearable hardware prototype, designed using KiCad.
vishalbodkhe/ESP32-Environmental-Monitoring-PCB
ESP32-based environmental monitoring PCB designed in KiCad with DHT11, LDR, OLED, custom routing, GND zone and manufacturing-ready Gerber files.
vishalbodkhe/ESP32-Smart-Temperature-Fan-Controller
KiCad PCB design of an ESP32 based smart temperature and fan controller.
vishalsaravanan-k/home-automation-using-esp32-and-relay
This project is a basic home automation system built using an ESP32, capable of turning appliances ON/OFF through both mobile app (via Wi-Fi) and an IR remote.
koushik12328/Smart_mining_helmet
An ESP32-powered safety helmet featuring gas detection, impact sensing, and IoT connectivity