

Step counter
Educational 8 bit CPU
- Size
- 80 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 55
- Pads
- 232
- Tracks, vias
- 424, 229
- Pours
- 355
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Feb 2026
- Updated
- 2 Nov 2026
Overview
Step counter is an open-source printed circuit board by ostertag, from the ostertag/edu8 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 80 × 40 mm with 59 parts on 55 nets, routed with 424 tracks and 229 vias.
It is built around the 74HC02, 74HC08D and 74HC109D, with the 74HC04D and 74HC161S among its other parts. Its parts include 13 resistors, 13 diodes, 9 capacitors, 8 ICs and 1 connector.
Main components
574HC02
-- Logic Gates ROHSonsemiLogic Gates74HC08D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV 2 27ns@4.5V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series AND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC109D
SO-16-40℃~+125℃ 1 2 2V~6V 3.5pF 30ns@6V,50pF 4uA 5.2mA 5.2mA 74HC Series 81MHz Complementary JK-Type Rising Edge Set and Reset SOIC-16 Flip Flops ROHSNexperiaFlip Flops74HC04D
SOP-14-40℃~+125℃ 1 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV、400mV 14ns@6V,50pF 2V~6V 2uA 5.2mA 5.2mA 500mV~1.8V 6 74HC SOIC-14 Inverters ROHSNexperiaInverters74HC161S
SOP-160℃~+70℃ 20MHz 2V~6V 4 500mW Asynchronous Hexadecimal Counter Rising Edge Synchronous Up Counter SOP-16 Counters, Dividers ROHSGRCounters, Dividers
README
README.mdedu8
Educational 8 bit CPU
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 6 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D10, D11, D12, D13 |
| 4 | ToolingHole | MountingHole:ToolingHole_1.152mm | H3, H4, H5, H6 |
| 2 | 74HC02 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U6, U7 |
| 2 | 74HC08 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U4, U5 |
| 2 | 74HC109 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U2, U3 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2 |
| 1 | ->E | LED_SMD:LED_0805_2012Metric | D8 |
| 1 | ->F | LED_SMD:LED_0805_2012Metric | D7 |
| 1 | ->I | LED_SMD:LED_0805_2012Metric | D9 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 74HC04 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U8 |
| 1 | 74HC161 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | CYCLE_END | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Horizontal | J1 |
| 1 | E | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | F | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | I | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | IM | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | IRQ | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | Val** | 8-bit_computer:by-nc-sa.eu | Ref** |
More from ostertag/edu8
8- 2 layers

- 2 layers100 × 60 mm

- 2 layers100 × 70 mm

- 2 layers100 × 50 mm

- 2 layers90 × 45 mm

- 2 layers70 × 39 mm

- 2 layers75 × 28 mm

- 2 layers100 × 70 mm

Similar boards
- 2 layers191.8 × 121.3 mm

8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
109 parts184 - 4 layers304.5 × 217.2 mm

Latest Full Backplane
Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips
478 parts2 - 2 layers180.3 × 112.4 mm

- 2 layers160 × 100 mm

- 2 layers149.9 × 74.9 mm

- 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 4 layers124.5 × 99.1 mm

- 4 layers126 × 140 mm

Questions
How big is the Step counter PCB?
It measures 80 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Step counter use?
59 parts, built around the 74HC02, 74HC08D, 74HC109D and 74HC04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Step counter KiCad files?
From the ostertag/edu8 repository on GitHub, at the commit this page was made from: the board is CAD/step_counter/step_counter.kicad_pcb and its schematic CAD/alu/alu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Step counter design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).