

Clu shield
Educational 8 bit CPU
- Size
- 100 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 55
- Pads
- 137
- Tracks, vias
- 249, 99
- Pours
- 131
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Feb 2026
- Updated
- 2 Nov 2026
Overview
Clu shield is an open-source printed circuit board by ostertag, from the ostertag/edu8 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 100 × 70 mm with 59 parts on 55 nets, routed with 249 tracks and 99 vias.
Its parts include 15 switches, 10 resistors, 10 diodes and 3 connectors.
README
README.mdedu8
Educational 8 bit CPU
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | LOGO | 8-bit_computer:warning_symbol | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 10 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 10 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 9 | SW_SPDT | 8-bit_computer:SW_Slide_SPDT_8.5x3.8mm | SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15 |
| 4 | ERD516RSZ | 8-bit_computer:ERD5XXXS | SW1, SW2, SW3, SW4 |
| 4 | ToolingHole | MountingHole:ToolingHole_1.152mm | H3, H4, H5, H6 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | ERD508RSZ | 8-bit_computer:ERD5XXXS | SW5, SW6 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2 |
| 1 | Conn_01x30_Pin | Connector_PinHeader_2.54mm:PinHeader_1x30_P2.54mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Val** | 8-bit_computer:by-nc-sa.eu | Ref** |
More from ostertag/edu8
8- 2 layers

- 2 layers100 × 60 mm

- 2 layers100 × 50 mm

- 2 layers90 × 45 mm

- 2 layers80 × 40 mm

- 2 layers70 × 39 mm

- 2 layers75 × 28 mm

- 2 layers100 × 70 mm

Similar boards
- 2 layers216.9 × 86.8 mm

Sweepbling lp pcb
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
59 parts2.1k - 2 layers132.3 × 94.9 mm

- 2 layers100 × 24 mm

STM32 Klipper Expander
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
59 parts1.1kGPL-3.0 - 2 layers77.5 × 20.4 mm

- 2 layers80 × 110 mm

NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers100 × 96 mm

Backlight
jackw01/scanlight
A better light source for scanning color negative film
59 parts397CERN-OHL-W-2.0 - 2 layers95.3 × 100 mm

Beyblock20
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
59 parts335GPL-3.0 - 2 layers94 × 94.5 mm

Vikropad
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
59 parts220CERN-OHL-P-2.0
Questions
How big is the Clu shield PCB?
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clu shield use?
59 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clu shield KiCad files?
From the ostertag/edu8 repository on GitHub, at the commit this page was made from: the board is CAD/clu_shield/clu_shield.kicad_pcb and its schematic CAD/alu/alu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clu shield design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).