
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

Working lab is an open-source printed circuit board by oskarrrrvk, from the oskarrrrvk/smart_lamp repository on GitHub, published under the MIT licence. It is a 2-layer board with 15 parts on 28 nets, routed with 101 tracks and 0 vias.
It is built around the L7805. Its parts include 7 connectors, 4 capacitors, 2 ICs, 1 resistor and 1 crystal. It belongs with the PIC boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C4 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2 |
| 1 | 0.33uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 2MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 5K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | Analogic | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | PIC16F886-IP | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | PIC_KIT | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | PWM | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J6 |
| 1 | SPI | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.


Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
15 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oskarrrrvk/smart_lamp repository on GitHub, at the commit this page was made from: the board is circuit/working_lab.kicad_pcb and its schematic circuit/working_lab.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).