Skip to the content
2 layers44.4 × 96.5 mmPersonality, the printed circuit board in 3D

There are similar adapter boards for sale through various sources. This design based only on the referenced article.

Size
44.4 × 96.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
45
Pads
110
Tracks, vias
341, 24
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
31 Mar 2015
Updated
21 Jun 2026

Overview

Personality is an open-source printed circuit board by osiweb, from the osiweb/Hardware repository on GitHub. It is a 2-layer board of 44.4 × 96.5 mm with 8 parts on 45 nets, routed with 341 tracks and 24 vias.

Its parts include 2 capacitors, 2 ICs and 1 connector.

README

new/apple-kbd-adapter/README.md

Apple 2 keyboard adapter for Apple 1 computer

This is a simple adapter to connect an Apple 2 compatible keyboard to an Apple 1 computer. The pinouts were obtained from the article Using an Apple II Keyboard with an Apple 1 Computer at Randomvariations.com.

There are similar adapter boards for sale through various sources. This design based only on the referenced article. Any similarities to alternative adapters is coincidental and due solely to the simplicity of the design, and obvious requirements such as the desire for reset and clear buttons mounted on the board and remotely.

Parts

8
QtyValueFootprintReferences
20.1uFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1, C2
210KResistor_THT:R_Array_SIP9RN1, RN2
128C256Package_DIP:DIP-28_W15.24mmU2
174LS08Package_DIP:DIP-14_W7.62mmU1
1JP_block_8Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJP1
1Personality-connectorpersonality:edge-sol-personaltiy-2.54-30J1

More from osiweb/Hardware

1
  • 2 layers32.4 × 43.8 mmApple2-kbd adapter, the printed circuit board in 3D

    Apple2-kbd adapter

    osiweb/Hardware

    There are similar adapter boards for sale through various sources. This design based only on the referenced article.

    8 parts13

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the Personality PCB?

It measures 44.4 × 96.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Personality use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Personality KiCad files?

From the osiweb/Hardware repository on GitHub, at the commit this page was made from: the board is new/sol20/personality/hardware/personality.kicad_pcb and its schematic new/sol20/personality/hardware/personality.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Personality design in my own project?

Its repository states no licence, so its author keeps all rights: ask osiweb before reusing the design.