2 layers68.6 × 53.3 mm
2 layers68.6 × 53.3 mm
RAF
osbock/RAF9Arduino Powered Desktop foam dart shooter for teaching embedded electronics
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 21
- Pads
- 159
- Tracks, vias
- 406, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 May 2017
- Updated
- 19 Mar 2021
Overview
RAF is an open-source printed circuit board by osbock, from the osbock/RAF repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 45 parts on 21 nets, routed with 406 tracks and 22 vias.
It is built around the LF60CDT-TR and FDC6305N. Its parts include 12 connectors, 9 capacitors, 5 resistors, 2 ICs and 2 diodes.
Main components
2
LF60CDT-TR
DPAK-40℃~+125℃@(Tj) 1 16V 1mA 500mA 6V 700mV@(500mA) Fixed Over Current Protection、Over Temperature Protection Positive DPAK Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FDC6305N
SOT-23-6-55℃~+150℃ 1.25W 1.2V 2 N-Channel 20V 45mΩ@2.5V 4A 513pF 60pF 7nC@4.5V SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdRAF - Ready...Aim...Fire!
Software for a beginning programming class with Arduino, and IOT programming with MQTT. Hardware consists of an Arduino, Shield, Pan/tilt mechanism and pneumatic components for firing foam darts
Instructions
Software requirements
- Arduino IDE
- Python 3.X
- Adafruit IOT python package
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | RAF_Libs:C_0805_HandSoldering | C1, C3, C4, C5, C6, C8, C9 |
| 4 | Jumper_NC_Small | RAF_Libs:0805_jumper | JP1, JP2, JP3, JP4 |
| 4 | NPTH_hole | RAF_Libs:NPTH_hole_3mm | H1, H2, H3, H4 |
| 3 | 100k | RAF_Libs:R_0805_HandSoldering | R5, R6, R7 |
| 3 | SERVO | RAF_Libs:Pin_Header_Straight_1x03_Pitch2.54mm | J1, J2, J4 |
| 2 | 22uF | RAF_Libs:CP_Elec_4x5.7 | C2, C7 |
| 2 | S1ATR | RAF_Libs:SMA_Handsoldering | D1, D2 |
| 1 | 100k | RAF_Libs:Res_variable | RV1 |
| 1 | 10K | RAF_Libs:R_0805_HandSoldering | R2 |
| 1 | 22K | RAF_Libs:R_0805_HandSoldering | R1 |
| 1 | AUX_TEST | RAF_Libs:TC2030-IDC | J8 |
| 1 | Analog | RAF_Libs:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | RAF_Libs:Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | RAF_Libs:Socket_Strip_Arduino_1x08 | P4 |
| 1 | FDC6305N | RAF_Libs:SuperSOT-6 | Q1 |
| 1 | I2C | RAF_Libs:Pin_Header_Straight_1x04_Pitch2.54mm | J7 |
| 1 | LF60CDT | RAF_Libs:DPak | U2 |
| 1 | LIGHT | RAF_Libs:Resistor_LDR_5.0x3.4 | LDR1 |
| 1 | LOGO_WL | RAF_Libs:logo_wyo_butterfly_small | WYO1 |
| 1 | OSHW | RAF_Libs:OSHW_6mm | OSHW1 |
| 1 | PUMP | RAF_Libs:TerminalBlock_Pheonix_PT-5.0mm_2pol | J5 |
| 1 | Power | RAF_Libs:Socket_Strip_Arduino_1x08 | P1 |
| 1 | RGB_WS2811B | RAF_Libs:LED_WS2812B-PLCC4 | U1 |
| 1 | SOL | RAF_Libs:TerminalBlock_Pheonix_PT-5.0mm_2pol | J3 |
| 1 | SeeedJoystick | RAF_Libs:SEEED-Joystick_v2 | JOY1 |
| 1 | TEMP | RAF_Libs:R_0805_HandSoldering | TH1 |
| 1 | WS2811-OUT | RAF_Libs:Pin_Header_Straight_1x03_Pitch2.54mm | J6 |
Questions
How big is the RAF PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RAF use?
45 parts, built around the LF60CDT-TR and FDC6305N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RAF KiCad files?
From the osbock/RAF repository on GitHub, at the commit this page was made from: the board is kicad_v2.1/RAF.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RAF design in my own project?
Its repository states no licence, so its author keeps all rights: ask osbock before reusing the design.
More from osbock/RAF
4- 2 layers35.6 × 35.6 mm
Aux test
osbock/RAF
Arduino Powered Desktop foam dart shooter for teaching embedded electronics
15 parts9 - 2 layers12.6 × 28.1 mm
Airmount
osbock/RAF
Arduino Powered Desktop foam dart shooter for teaching embedded electronics
4 parts9 - 2 layers12 × 16 mm
Airmount
osbock/RAF
Arduino Powered Desktop foam dart shooter for teaching embedded electronics
4 parts9
Similar boards
- 2 layers81 × 81 mm
- 2 layers30 × 61.3 mm
- 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm
- 2 layers63.5 × 63.5 mm
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm
RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0