
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Passive adapter to connect a Vita 2000 joystick to the PSP 3000
Vitastickinpsp is an open-source printed circuit board by orangeglo, from the orangeglo/VitaStickForPSP3000 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 6.8 × 10 mm with 2 parts on 6 nets, routed with 19 tracks and 4 vias.
Passive adapter to connect a Vita 2000 joystick to the PSP 3000 (and probably the PSP Street/E1000)


| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 2328702-4 | 2328702-4:23287024 | J2 |
| 1 | FH19C-6S-0.5SH_05_ | FH19C-6S-0.5SH_05_:FH19C6S05SH05 | J1 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 6.8 × 10 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the orangeglo/VitaStickForPSP3000 repository on GitHub, at the commit this page was made from: the board is vitastickinpsp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).