Skip to the content
2 layers16 × 26 mmAlice mini, the printed circuit board in 3D

A small PCB based on the circuit OPA Alice created by DJJules

Size
16 × 26 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
12
Pads
53
Tracks, vias
6, 7
Pours
14
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Nov 2024
Updated
22 Nov 2024

Overview

Alice mini is an open-source printed circuit board by oranellis, from the oranellis/alice-mini repository on GitHub. It is a 2-layer board of 16 × 26 mm with 27 parts on 12 nets, routed with 6 tracks and 7 vias.

Its parts include 10 resistors, 8 capacitors, 1 IC and 1 diode.

README

README.md

OPA Alice Mini

Circuit from the OPA Alice design by DJJules, which itself was based on the Alice microphone by Scott Helmke, this is a PCB designed for a 3D printed mic enclosure for the JLI-2555B Capsule. I started the project off the back of the DIYPerks video where Matthew made a gorgeous mic based on the same capsule, however I wanted to connect it to my Scarlet Focusrite Solo instead and stumbled on the Alice mic.

Design

The circuit is identical to the OPA Alice preamp circuit with the exception of using MLCC's instead of Aluminium electrolytic capacitors. It is designed in Kicad 8 with the JLCPCB plugin, and ordered pre-assembled from JLCPCB. This is my first PCB design so please scrutinise it thoroughly before using or ordering one for yourself. THE BOARD HAS NOT ARRIVED FOR ME YET AND MAY HAVE ISSUES, please wait until I update this with the information of whether it works or not. If it does work, I will design the 3D printed enclosure and add those files here (or a link to the onshape page).

Parts

27
QtyValueFootprintReferences
810uFCapacitor_SMD:C_1206_3216MetricC1, C2, C3, C4, C5, C6, C7, C8
42.2KResistor_SMD:R_0603_1608MetricR2, R3, R7, R8
247Resistor_SMD:R_0603_1608MetricR9, R10
247KResistor_SMD:R_0603_1608MetricR4, R5
11000MResistor_SMD:R_0805_2012MetricR1
112VDiode_SMD:D_SOD-123D1
1470Resistor_SMD:R_0603_1608MetricR6
1Mic+TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmH4
1Mic-TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmH5
1OPA1642AIDRProject_Library:SOIC127P600X175-8NIC1
1XLR1TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmH8
1XLR2TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmH6
1XLR3TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmH7

The 25 most common of 27 parts.

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the Alice mini PCB?

It measures 16 × 26 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Alice mini use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Alice mini KiCad files?

From the oranellis/alice-mini repository on GitHub, at the commit this page was made from: the board is AliceMini.kicad_pcb and its schematic AliceMini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Alice mini design in my own project?

Its repository states no licence, so its author keeps all rights: ask oranellis before reusing the design.