
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

TriStepper is an open-source printed circuit board by OpenRover, from the OpenRover/TriStepperController-PCB repository on GitHub. It is a 2-layer board of 56 × 85 mm with 33 parts on 57 nets, routed with 214 tracks and 12 vias.
Its parts include 9 resistors, 3 capacitors and 3 switches. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R9 |
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal_Boxes | M1, M2, M3, PWR1 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Bare | H1, H2, H3, H4 |
| 3 | 0.1uF | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C1, C2, C3 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal_Bare | SW0, SW1, SW2 |
| 3 | ~ | SOM:StepperDriver | DRV0, DRV1, DRV2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JMP1, PWR2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Arduino_Nano_ESP32 | Module:Arduino_Nano_ESP32 | A1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal_Boxes | WS2812 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal_Boxes | SPI0 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal_Boxes | RGB_Sensor1 |
| 1 | ~ | SOM:Buck_Converter | CVT1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 56 × 85 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenRover/TriStepperController-PCB repository on GitHub, at the commit this page was made from: the board is TriStepper.kicad_pcb and its schematic TriStepper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OpenRover before reusing the design.