Skip to the content
2 layers40 × 55 mmQT1, the printed circuit board in 3D

Repository for the OpenQRNG QT1 project

Size
40 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
46
Pads
76
Tracks, vias
117, 2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
1 Mar 2023
Updated
9 Mar 2023

Overview

QT1 is an open-source printed circuit board by openqrng, from the openqrng/QT1 repository on GitHub. It is a 2-layer board of 40 × 55 mm with 13 parts on 46 nets, routed with 117 tracks and 2 vias.

It is built around the TLE2141CD and AD8561ARZ. Its parts include 5 resistors, 4 ICs, 3 capacitors and 1 diode.

Main components

2

README

README.md

QT1

This repository contains sources of the OpenQRNG QT1.

Description

OpenQRNG QT1 is a 1Mbps open source quantum random number generator compliant with NIST-SP800-22 test suite. This repository contains:

  • Hardware sources (schematic, PCB...)
  • Software source
  • Documentations (operating manual)

License

Hardware

All hardware is licensed under the CERN-OHL-S v2.

Copyright OpenQRNG 2023.

This source describes Open Hardware and is licensed under the CERN-OHL-S v2.

You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-S v2. This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions

Software

Copyright (C) 2023 OpenQRNG

All software is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this source. If not, see https://www.gnu.org/licenses/.

Parts

13
QtyValueFootprintReferences
2500Resistor_SMD:R_0603_1608MetricR4, R5
275pFCapacitor_SMD:C_0603_1608MetricC2, C3
1110Resistor_SMD:R_0603_1608MetricR1
11kResistor_SMD:R_0603_1608MetricR2
150pFCapacitor_SMD:C_0603_1608MetricC1
1680Resistor_SMD:R_0603_1608MetricR3
1AD8561ARZPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1AEY22Package_TO_SOT_THT:TO-18-3D1
1MCP601-xSNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1TLE2141CDPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1Teensy 4.0DEV-15583:MODULE_DEV-15583U4

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the QT1 PCB?

It measures 40 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the QT1 use?

13 parts, built around the TLE2141CD and AD8561ARZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the QT1 KiCad files?

From the openqrng/QT1 repository on GitHub, at the commit this page was made from: the board is hardware/QT1.kicad_pcb and its schematic hardware/QT1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the QT1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask openqrng before reusing the design.