2 layers88.9 × 81.3 mm
2 layers43.2 × 15.2 mm
1016-IntfBrdG2
openpinballproject/opp2Open pinball project firmware
- Size
- 43.2 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 11
- Pads
- 44
- Tracks, vias
- 90, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Dec 2025
- Updated
- 9 May 2026
Overview
1016-IntfBrdG2 is an open-source printed circuit board by openpinballproject, from the openpinballproject/opp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 43.2 × 15.2 mm with 13 parts on 11 nets, routed with 90 tracks and 6 vias.
Its parts include 9 connectors and 3 resistors.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_4 | SIL-4 | P2, P3, P4 |
| 2 | 480 | R1 | R2, R3 |
| 2 | CONN_4X2 | pin_array_4x2 | P5, P6 |
| 1 | 0 | R3 | R1 |
| 1 | CONN_2 | 00_th1x2x100-lock | P15 |
| 1 | CONN_3 | SIL-3 | P8 |
| 1 | CONN_4 | 00_th1x4x100-lock | P7 |
| 1 | REF | opp_logo_backsilk | VAL |
| 1 | TST | 00_mtg_hole-2-56 | P1 |
More from openpinballproject/opp
12- 2 layers88.9 × 81.3 mm
- 2 layers86.4 × 91.4 mm
- 2 layers88.9 × 81.3 mm
- 2 layers100 × 65 mm
- 2 layers100 × 65 mm
- 2 layers100 × 100 mm
- 2 layers44.4 × 20.3 mm
- 2 layers50 × 65 mm
- 2 layers50 × 65 mm
- 2 layers100 × 100 mm
- 2 layers50 × 100 mm
Similar boards
- 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the 1016-IntfBrdG2 PCB?
It measures 43.2 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 1016-IntfBrdG2 use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 1016-IntfBrdG2 KiCad files?
From the openpinballproject/opp repository on GitHub, at the commit this page was made from: the board is Kicad/1016-IntfBrdG2/1016.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 1016-IntfBrdG2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).