
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

Hardware is based off an open source project called Speeduino by Josh Stewart.
N fet is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 10.1 × 16.6 mm with 2 parts on 3 nets, routed with 5 tracks and 32 vias.
It is built around the NCV8406ADT. Its parts include 1 transistor and 1 connector.
Formerly: DetonationEMS
OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"
All designs are released under the TAPR Open Hardware License v1.0
The Official Speeduino Manual, documents and discord are the best places to start.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | NCV8406A | Package_TO_SOT_SMD:SOT-223 | Q1 |

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 10.1 × 16.6 mm and has 2 copper layers, 1.6 mm thick.
2 parts, built around the NCV8406ADT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Modules/INJ THT Fet/n-fet/n-fet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.