
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

Hardware is based off an open source project called Speeduino by Josh Stewart.
Map pinned is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 25 × 10 mm with 6 parts on 9 nets, routed with 16 tracks and 11 vias.
It is built around the MPXH6400AC6U. Its parts include 3 capacitors, 1 resistor, 1 IC and 1 connector.
Formerly: DetonationEMS
OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"
All designs are released under the TAPR Open Hardware License v1.0
The Official Speeduino Manual, documents and discord are the best places to start.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 47pF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 51k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Horizontal | J1 |
| 1 | MPXH6400a | Detonation:MPXHxxx_Handsoldering | IC1 |

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.




byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 25 × 10 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the MPXH6400AC6U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Modules/MAP Sensor Modules/PMAP-M/Rev2/map-pinned.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.