Skip to the content
2 layers25 × 8.6 mmMap pinned, the printed circuit board in 3D

Hardware is based off an open source project called Speeduino by Josh Stewart.

Size
25 × 8.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
14
Pads
22
Tracks, vias
17, 3
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Mar 2020
Updated
19 Oct 2026

Overview

Map pinned is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 25 × 8.6 mm with 3 parts on 14 nets, routed with 17 tracks and 3 vias.

Its parts include 2 ICs and 1 connector.

README

README.md

Website

OpenLogicEFI

Formerly: DetonationEMS

OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"

License

All designs are released under the TAPR Open Hardware License v1.0

Documentation

Parts

3
QtyValueFootprintReferences
1BaroDetonation:MPXH6250IC2
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_HorizontalJ1
1MapDetonation:MPXH6250IC1

More from OpenLogicEFI/Hardware

12
  • 4 layers115.5 × 96.2 mmClosed deck x4, the printed circuit board in 3D

    Closed deck x4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    245 parts19
  • 2 layers115.5 × 96.2 mmClosed deck x4, the printed circuit board in 3D

    Closed deck x4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    223 parts19
  • 2 layers98.8 × 69.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    167 parts19
  • 2 layers100 × 99.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 4 layers98.8 × 69.8 mmSparkGapX4, the printed circuit board in 3D

    SparkGapX4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 2 layers98.8 × 69.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    159 parts19
  • 2 layers100 × 100 mm1.3e, the printed circuit board in 3D

    1.3e

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    157 parts19
  • 2 layers100 × 99.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    152 parts19
  • 2 layers100 × 100 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    142 parts19
  • 2 layers100 × 100 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    141 parts19
  • 2 layers100 × 100 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    136 parts19
  • 2 layers98.2 × 53.3 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    104 parts19

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the Map pinned PCB?

It measures 25 × 8.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Map pinned use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Map pinned KiCad files?

From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Modules/MAP Sensor Modules/PMAP-L/map-pinned.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Map pinned design in my own project?

Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.