
OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.

Impedance Reduction Circuit for Low-Cost Pressure Sensor
Pressure sensor pcb is an open-source printed circuit board by openhorsesim, from the openhorsesim/pressure-sensor-pcb repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board with 38 parts on 83 nets.
Its parts include 24 resistors, 12 ICs and 1 connector. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Impedance Reduction Circuit for Low-Cost Pressure Sensor
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 4066 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12 |
| 6 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R7, R11, R15, R19, R23 |
| 6 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R8, R12, R16, R20, R24 |
| 6 | 10M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R5, R9, R13, R17, R21 |
| 6 | 1M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R6, R10, R14, R18, R22 |
| 1 | Arduino_Uno_WiFi_R2_Shield | Arduino:Arduino_Uno_Shield | XA1 |
| 1 | Conn_02x24_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x24_P2.54mm_Vertical | J1 |

joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the openhorsesim/pressure-sensor-pcb repository on GitHub, at the commit this page was made from: the board is pressure-sensor-pcb/pressure-sensor-pcb.kicad_pcb and its schematic pressure-sensor-pcb/pressure-sensor-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).