2 layers85 × 115 mm
OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
38 parts8.1kCC-BY-SA-4.0
2 layers
Pressure sensor pcb
openhorsesim/pressure-sensor-pcbImpedance Reduction Circuit for Low-Cost Pressure Sensor
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 83
- Pads
- 306
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Feb 2023
- Updated
- 24 Feb 2023
Overview
Pressure sensor pcb is an open-source printed circuit board by openhorsesim, from the openhorsesim/pressure-sensor-pcb repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board with 38 parts on 83 nets.
Its parts include 24 resistors, 12 ICs and 1 connector. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdpressure-sensor-pcb
Impedance Reduction Circuit for Low-Cost Pressure Sensor
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 4066 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12 |
| 6 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R7, R11, R15, R19, R23 |
| 6 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R8, R12, R16, R20, R24 |
| 6 | 10M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R5, R9, R13, R17, R21 |
| 6 | 1M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R6, R10, R14, R18, R22 |
| 1 | Arduino_Uno_WiFi_R2_Shield | Arduino:Arduino_Uno_Shield | XA1 |
| 1 | Conn_02x24_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x24_P2.54mm_Vertical | J1 |
Questions
What parts does the Pressure sensor pcb use?
38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pressure sensor pcb KiCad files?
From the openhorsesim/pressure-sensor-pcb repository on GitHub, at the commit this page was made from: the board is pressure-sensor-pcb/pressure-sensor-pcb.kicad_pcb and its schematic pressure-sensor-pcb/pressure-sensor-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pressure sensor pcb design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers38.1 × 12.7 mm
- 2 layers136 × 84 mm
Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
38 parts915 - 2 layers126.4 × 15.2 mm
- 2 layers66 × 25.4 mm
Ardmover Empfangsspule Yann
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
38 parts282 - 2 layers17.8 × 17.8 mm
Altmode friend
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
38 parts253GPL-3.0 - 2 layers51.4 × 61 mm
- 2 layers125 × 97.2 mm
