2 layers196 × 104 mm
2 layers
ICS-43434-PCB
OpenAirCgn/openmike1ICS43434 Breakout
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 6
- Pads
- 17
- Tracks, vias
- 21, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Feb 2020
- Updated
- 2 Jun 2020
Overview
ICS-43434-PCB is an open-source printed circuit board by OpenAirCgn, from the OpenAirCgn/openmike repository on GitHub. It is a 2-layer board with 9 parts on 6 nets, routed with 21 tracks and 1 via.
It is built around the ICS-43434. Its parts include 1 capacitor and 1 resistor.
Main components
1README
README.mdBreakout for ICS43434 MEMS i2s Microphone
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | + | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | - | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP6 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | ICS-43434 | ICS-43434:MIC_ICS-43434 | MK1 |
| 1 | LR | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | SC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | SD | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP5 |
| 1 | WS | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4 |
Questions
What parts does the ICS-43434-PCB use?
9 parts, built around the ICS-43434. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ICS-43434-PCB KiCad files?
From the OpenAirCgn/openmike repository on GitHub, at the commit this page was made from: the board is ICS-43434-PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ICS-43434-PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask OpenAirCgn before reusing the design.
Similar boards
- 2 layers
AI voice assistant
DhamuVkl/ESP32S3-AI-Voice-Assistant
This project is a complete DIY AI voice assistant built around the ESP32-S3 microcontroller. It combines custom PCB design, advanced audio processing, and cloud-based AI to create a device that rivals commercial smart…
78 parts26MIT - 4 layers52.5 × 59.7 mm
ESPHome Indoor Multi Sensor
mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.
113 parts14CERN-OHL-P-2.0 - 4 layers108.6 × 87.7 mm
Blinky badge light
rowr111/blinky-badge-light
lighting badge with unique patterns and sound reactivity
123 parts9MIT - 4 layers66.8 × 150 mm
Cooee Big brains
DetectiveMittens/Cooee
An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication
200 parts3GPL-2.0 - 2 layers9.9 × 7.9 mm
Ics43434 breakout
expoman/tdk_ics-43434_breakout
small breakout board for the TDK ICS-43434 microphone chip
5 parts2GPL-3.0 - 2 layers178.6 × 66 mm
ESP32S3comV3.2
leeyumsk/IRL-Subtitles
Using techniques similar to human perception to localize sounds and speakers.
69 parts2 - 4 layers88.1 × 59.4 mm
Chromapi motherboard v1
Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.
139 parts2Apache-2.0