Skip to the content
2 layers69.6 × 55.9 mmTestbed mcu, the printed circuit board in 3D

ECE 438X Senior Design Capstone Project

Size
69.6 × 55.9 mm
Copper layers
2
Thickness
1.65 mm
Parts
24
Nets
76
Pads
189
Tracks, vias
587, 187
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Jun 2025
Updated
16 Feb 2026

Overview

Testbed mcu is an open-source printed circuit board by OpenAir-Lab, from the OpenAir-Lab/capstone-project repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.6 × 55.9 mm with 24 parts on 76 nets, routed with 587 tracks and 187 vias.

It is built around the ESP32-WROVER-E(4MB). Its parts include 6 resistors, 4 capacitors, 4 crystals, 2 ICs and 2 switches. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

capstone-project

ECE 438X Senior Design Capstone Project

Parts

24
QtyValueFootprintReferences
410kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4
4EYESPIcapstone-project:Adafruit EYESPI FPC ConnectorX6, X7, X8, X9
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_ISO14580_PadH17, H18, H19, H20
30.1uCapacitor_SMD:C_0603_1608MetricC1, C3, C4
24.7kResistor_SMD:R_0603_1608MetricR5, R6
2SW_PushButton_Switch_SMD:SW_SPST_EVQP2_MiddlePushTravel_H2.5mmSW1, SW2
110uCapacitor_SMD:C_0603_1608MetricC2
1ESP32-WROVER-Ecapstone-project:ESP32-WROVER-IEU1
1LOGOLOGOG***
1PCF8575DBRPackage_SO:SSOP-24_5.3x8.2mm_P0.65mmU2
1Stemma QTConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ1

More from OpenAir-Lab/capstone-project

12
  • 4 layers182.6 × 41.8 mmSystem testbed, the printed circuit board in 3D

    System testbed

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    199 parts3MIT
  • 4 layers156.8 × 97.5 mmModulino, the printed circuit board in 3D

    Modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    190 parts3MIT
  • 4 layers57 × 41 mmRf transceiver modulino, the printed circuit board in 3D

    Rf transceiver modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    113 parts3MIT
  • 2 layers58.4 × 65.8 mmBOOSTXL BATPAKMKII, the printed circuit board in 3D

    BOOSTXL BATPAKMKII

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    74 parts3MIT
  • 2 layers70 × 57.5 mmHmi modulino, the printed circuit board in 3D

    Hmi modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    74 parts3MIT
  • 4 layers39.3 × 56.7 mmCC1200EMK-420-470-old, the printed circuit board in 3D

    CC1200EMK-420-470-old

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    59 parts3MIT
  • 4 layers39.4 × 35.6 mmCC1120EM 169, the printed circuit board in 3D

    CC1120EM 169

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    57 parts3MIT
  • 4 layers41 × 41 mmRf amplifier modulino, the printed circuit board in 3D

    Rf amplifier modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    57 parts3MIT
  • 4 layers68.9 × 53.3 mmMcu modulino, the printed circuit board in 3D

    Mcu modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    55 parts3MIT
  • 2 layers41 × 25.4 mmAudio PCB, the printed circuit board in 3D

    Audio PCB

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    28 parts3MIT
  • 4 layers25.4 × 41.4 mmRf switch modulino, the printed circuit board in 3D

    Rf switch modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    28 parts3MIT
  • 4 layers30.5 × 30.5 mmGRF DFN6-15-23A, the printed circuit board in 3D

    GRF DFN6-15-23A

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    21 parts3MIT

Similar boards

  • 4 layers28 × 80 mmESP32-PoE Rev M, the printed circuit board in 3D

    ESP32-PoE Rev M

    OLIMEX/ESP32-POE

    ESP32 IoT development board with 100Mb Ethernet and 802.3 Power Over Ethernet (POE)

    142 parts415Apache-2.0
  • 6 layers83.5 × 56 mmEspiff v3 1, the printed circuit board in 3D

    Espiff v3 1

    MDCservice/EsPiFF

    An ESP32 in the Raspberry Pi form factor

    172 parts223GPL-3.0
  • 2 layers84.2 × 52 mmPicoPico, the printed circuit board in 3D

    PicoPico

    DavidVentura/PicoPico

    Pico-8 Player

    57 parts141
  • 2 layers80 × 50 mmThermal Camera, the printed circuit board in 3D

    Thermal Camera

    Circuit-Digest/MLX90640-Thermal-Camera

    An Open Source Thermal Imaging IR camera that you can build yourserlf

    66 parts94
  • 4 layers239.5 × 239.5 mmBroadcast clock, the printed circuit board in 3D

    Broadcast clock

    espena/broadcast-clock

    Digital precision studio/broadcast masterclock with WiFi configuration, acts as local NTP server with accurate GPS time sync.

    440 parts28GPL-3.0
  • 2 layers58.8 × 55.7 mmAiO i2s DAC, the printed circuit board in 3D

    AiO i2s DAC

    martinroger/ipodesp32

    An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth

    102 parts24MIT
  • 2 layers99.1 × 49.9 mmRc fabgl, the printed circuit board in 3D

    Rc fabgl

    PickledDog/rc-fabgl

    FabGL terminal board for RC2014

    47 parts17Apache-2.0
  • 2 layers82 × 82 mmFtduino32, the printed circuit board in 3D

    Ftduino32

    harbaum/ftduino32

    ESP32 based variant of the ftDuino

    157 parts5

Questions

How big is the Testbed mcu PCB?

It measures 69.6 × 55.9 mm and has 2 copper layers, 1.65 mm thick.

What parts does the Testbed mcu use?

24 parts, built around the ESP32-WROVER-E(4MB). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Testbed mcu KiCad files?

From the OpenAir-Lab/capstone-project repository on GitHub, at the commit this page was made from: the board is Hardware/KiCAD/mcu-modulino/testbed-mcu.kicad_pcb and its schematic Documentation/Reference Designs/Adafruit/TFT Display Module/Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Testbed mcu design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).