2 layers27.9 × 16.5 mm
2 layers24 × 24 mm
Buffered multiple
open-source-modular/tile-active-multipleAn active multiple in the tile form factor.
- Size
- 24 × 24 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 19
- Pads
- 53
- Tracks, vias
- 84, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Oct 2022
- Updated
- 11 Oct 2022
Overview
Buffered multiple is an open-source printed circuit board by open-source-modular, from the open-source-modular/tile-active-multiple repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 24 × 24 mm with 18 parts on 19 nets, routed with 84 tracks and 10 vias.
Its parts include 8 resistors, 5 connectors, 4 capacitors and 1 IC.
README
README.mdtile-active-multiple
An active multiple tile with one input and three outputs.
This tile uses stereo mini jack connectors, since they are cheaper than the mono version. The middle pin is purposely not connected.
KiCAD files are for version 6.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100pF | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C3 |
| 3 | 220 | Resistors_SMD:R_1206_HandSoldering | R1, R3, R5 |
| 3 | 4.7K | Resistors_SMD:R_1206_HandSoldering | R2, R4, R6 |
| 1 | 100K | Resistors_SMD:R_1206_HandSoldering | R7 |
| 1 | 100nF | Capacitors_SMD:C_1206_HandSoldering | C4 |
| 1 | 1K | Resistors_SMD:R_1206_HandSoldering | R8 |
| 1 | InputJack1 | open-source-modular:PJ392-3.5mm-jack-vertical-SRT | J1 |
| 1 | OutputJack1 | open-source-modular:PJ392-3.5mm-jack-vertical-SRT | J2 |
| 1 | OutputJack2 | open-source-modular:PJ392-3.5mm-jack-vertical-SRT | J3 |
| 1 | OutputJack3 | open-source-modular:PJ392-3.5mm-jack-vertical-SRT | J4 |
| 1 | TL074 | SMD_Packages:SOIC-14_N | U1 |
| 1 | power_supply | open-source-modular:eurorack-tile-power-connector | J5 |
Questions
How big is the Buffered multiple PCB?
It measures 24 × 24 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Buffered multiple use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buffered multiple KiCad files?
From the open-source-modular/tile-active-multiple repository on GitHub, at the commit this page was made from: the board is kicad/buffered_multiple.kicad_pcb and its schematic kicad/buffered_multiple.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buffered multiple design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers42.7 × 13.7 mm
Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm
- 2 layers44 × 51.3 mm
4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0