

Oomlout oomp electronic project usb switch
A simple usb switch using a re22227 chip in oobb plate0303 format ibom github: ibom github ibom direct: ibom direct
- Size
- 45 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 17
- Pads
- 93
- Tracks, vias
- 120, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Sep 2023
- Updated
- 5 Oct 2023
Overview
Oomlout oomp electronic project usb switch is an open-source printed circuit board by oomlout, from the oomlout/oomlout_oomp_electronic_project_usb_switch repository on GitHub. It is a 2-layer board of 45 × 45 mm with 23 parts on 17 nets, routed with 120 tracks and 13 vias.
Its parts include 6 connectors, 3 capacitors, 3 resistors, 2 ICs and 2 switches.
README
readme.mdUsb Switch Two to One
A simple usb switch using a re22227 chip in oobb plate_03_03 format
A simple usb switch using a re22227 chip in oobb plate_03_03 format
- ibom github: ibom github
- ibom direct: ibom direct
schematic
pcb
corel working

module
- connector_usb_micro_surface_mount
- connector_usb_micro_surface_mount
- connector_usb_a_through_hole
- ic_usb_multiplexer_msop_10_two_to_one_rs2227xn
- logic_glue
- mechanical_board_shape_oobb_plate_03_03
- switch_slide_single_pole_double_throw_2_8_mm_x_8_mm_x_1_4
- switch_slide_single_pole_double_throw_2d54_header
oomp_parts_summary
Search Links: (L) - lcsc, (D) - digikey, (M) - mouser, (N) - newark, (SZ) - szlcsc note: a work on progress that takes the bom file from kicad pcb and try's to add oomp details
positions
top
| # Ref | Val | Package | PosX | PosY | Rot | Side |
|---|---|---|---|---|---|---|
| C1 | c6nf100 | c6nf100_electronic_capacitor_0603_100_nano_farad | 3.0 | 1.725 | -90.0 | top |
| C2 | c6nf100 | c6nf100_electronic_capacitor_0603_100_nano_farad | -9.0 | -9.5 | 0.0 | top |
| C3 | c8d65tuf220v10 | c8d65tuf220v10_electronic_capacitor_8_mm_diameter_6_5_mm_tall_electrolytic_220_micro_farad_10_volt | -7.55 | -4.0 | 0.0 | top |
| CON1 | scumcsm | scumcsm_electronic_socket_usb_micro_surface_mount | -21.11 | 3.175 | -90.0 | top |
| CON2 | scumcsm | scumcsm_electronic_socket_usb_micro_surface_mount | -21.11 | -11.825 | -90.0 | top |
| CON3 | scuath | scuath_electronic_socket_usb_a_through_hole | 12.7 | -5.73 | 90.0 | top |
| IC1 | imsp10mpump21rs2227 | imsp10mpump21rs2227_electronic_ic_msop_10_multiplexer_usb_multiplexer_two_to_one_jiangsu_runic_tech_rs2227xn | 0.0 | 0.0 | -90.0 | top |
| IC2 | itssp8mpptps2113 | itssp8mpptps2113_electronic_ic_tssop_8_multiplexer_power_multiplexer_texas_instruments_tps2113apw | -15.0 | -4.5 | -90.0 | top |
| J1 | hi14pth | hi14pth_electronic_header_2_54_mm_4_pin_through_hole | 19.0 | -6.0 | 180.0 | top |
| J3 | hi14pth | hi14pth_electronic_header_2_54_mm_4_pin_through_hole | -15.5 | 6.0 | 90.0 | top |
| J4 | hi14pth | hi14pth_electronic_header_2_54_mm_4_pin_through_hole | -12.5 | -18.5 | -90.0 | top |
| R1 | r6o103 | r6o103_electronic_resistor_0603_10000_ohm | 2.0 | -4.0 | 0.0 | top |
| R2 | r6o103 | r6o103_electronic_resistor_0603_10000_ohm | 2.175 | 4.5 | 0.0 | top |
| R3 | r6o271 | r6o271_electronic_resistor_0603_270_ohm | -15.5 | 0.5 | 0.0 | top |
| SW1 | sws2880s | sws2880s_electronic_switch_slide_2_8_mm_x_8_mm_x_1_4_mm_surface_mount_single_pole_double_throw | 0.0 | -19.5 | 0.0 | top |
| SW2 | swsi1hs | swsi1hs_electronic_switch_slide_2_54_header_surface_mount_single_pole_double_throw | -0.04 | -7.5 | 90.0 | top |
bottom
no data
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | mhm3 | oomlout_oomp_part_footprints:mhm3_electronic_mounting_hole_m3 | H3, H4, H6, H7 |
| 3 | hi14pth | oomlout_oomp_part_footprints:hi14pth_electronic_header_2_54_mm_4_pin_through_hole | J1, J3, J4 |
| 3 | mhm6 | oomlout_oomp_part_footprints:mhm6_electronic_mounting_hole_m6 | H1, H5, H8 |
| 2 | c6nf100 | oomlout_oomp_part_footprints:c6nf100_electronic_capacitor_0603_100_nano_farad | C1, C2 |
| 2 | r6o103 | oomlout_oomp_part_footprints:r6o103_electronic_resistor_0603_10000_ohm | R1, R2 |
| 2 | scumcsm | oomlout_oomp_part_footprints:scumcsm_electronic_socket_usb_micro_surface_mount | CON1, CON2 |
| 1 | c8d65tuf220v10 | oomlout_oomp_part_footprints:c8d65tuf220v10_electronic_capacitor_8_mm_diameter_6_5_mm_tall_electrolytic_220_micro_farad_10_volt | C3 |
| 1 | imsp10mpump21rs2227 | oomlout_oomp_part_footprints:imsp10mpump21rs2227_electronic_ic_msop_10_multiplexer_usb_multiplexer_two_to_one_jiangsu_runic_tech_rs2227xn | IC1 |
| 1 | itssp8mpptps2113 | oomlout_oomp_part_footprints:itssp8mpptps2113_electronic_ic_tssop_8_multiplexer_power_multiplexer_texas_instruments_tps2113apw | IC2 |
| 1 | r6o271 | oomlout_oomp_part_footprints:r6o271_electronic_resistor_0603_270_ohm | R3 |
| 1 | scuath | oomlout_oomp_part_footprints:scuath_electronic_socket_usb_a_through_hole | CON3 |
| 1 | sws2880s | oomlout_oomp_part_footprints:sws2880s_electronic_switch_slide_2_8_mm_x_8_mm_x_1_4_mm_surface_mount_single_pole_double_throw | SW1 |
| 1 | swsi1hs | oomlout_oomp_part_footprints:swsi1hs_electronic_switch_slide_2_54_header_surface_mount_single_pole_double_throw | SW2 |
Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the Oomlout oomp electronic project usb switch PCB?
It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Oomlout oomp electronic project usb switch use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Oomlout oomp electronic project usb switch KiCad files?
From the oomlout/oomlout_oomp_electronic_project_usb_switch repository on GitHub, at the commit this page was made from: the board is kicad/current_version/working/working.kicad_pcb and its schematic kicad/current_version/working/working.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Oomlout oomp electronic project usb switch design in my own project?
Its repository states no licence, so its author keeps all rights: ask oomlout before reusing the design.




