
Battery bus
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

A 34 key wireless split keyboard that supports hotswap for MX, Choc V1, and Choc V2 switches.
Doodle is an open-source printed circuit board by onnenon, from the onnenon/doodle_34 repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 247 × 96.8 mm with 136 parts on 82 nets, routed with 605 tracks and 45 vias.
Its parts include 34 diodes and 34 switches. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
A 34 key wireless split keyboard that supports hotswap for MX, Choc V1, and Choc V2 switches.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | D | axseem:D_SOD-123_Handsoldering | D2, D10, D11, D12, D14, D15, D16, D17, D18, D22, D23, D25, D26, D27, D28, D29 +18 |
| 34 | SW_Push | axseem:SW_MX_Choc-v1v2_Hotswap | SW2, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW22, SW23, SW25, SW26, SW27, SW28, SW29 +18 |
| 16 | , , , , , , , , , , , , , , , | ||
| 8 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H2, H3, H5, H6, H8, H9, H11, H12 |
| 2 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | L_BATT1, R_BATT1 |
| 2 | G*** | kibuzzard-636588C8 | kibuzzard-636588C8, kibuzzard-636588C8 |
| 2 | G*** | kibuzzard-636592CC | kibuzzard-636592CC, kibuzzard-636592CC |
| 2 | G*** | kibuzzard-63658865 | kibuzzard-63658865, kibuzzard-63658865 |
| 2 | Reset_SW | axseem:SMD_RESET | L_RSW1, R_RSW1 |
| 2 | SW_SPDT | axseem:smt-slider-switch | L_POWER_SW1, R_POWER_SW1 |
| 2 | nice!view | axseem:nice_view | L_DISPLAY1, R_DISPLAY1 |
| 2 | nice_nano | axseem:nice_nano | L_MCU1, R_MCU1 |
| 1 | LOGO | graphics:doodles_1 | G*** |
| 1 | LOGO | graphics:skelly4 | G*** |
| 1 | LOGO | graphics:people | G*** |
| 1 | LOGO | graphics:doodles_5 | G*** |
The 112 most common of 136 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware

Spaceboards/SpaceboardsHardware
A collection of open source hardware that has been designed by Spaceboards


NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.

kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.

zhol0777/bully-files
Bully is a keyboard designed by paaradiso keyboard design and zhol. It combines low typing angle, a plateless build, and modest but dignified design sensibilities.
It measures 247 × 96.8 mm and has 2 copper layers, 1.6 mm thick.
136 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the onnenon/doodle_34 repository on GitHub, at the commit this page was made from: the board is pcb/doodle.kicad_pcb and its schematic pcb/doodle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).