2 layers79.5 × 79.5 mm
Esp32-energymeter V2
ElektorLabs/esp32-energymeter
The Elektor ESP32 Energy Meter project, featuring schematics, PCB designs, and ESPHome integration for advanced energy monitoring
116 parts48MIT
4 layers96.5 × 66.5 mm
SeniorProjectVSC-3phSensor
onlineknudsen/SeniorProjectVSC-3phSensor- Size
- 96.5 × 66.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 53
- Pads
- 167
- Tracks, vias
- 524, 805
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Apr 2024
- Updated
- 19 Apr 2024
Overview
SeniorProjectVSC-3phSensor is an open-source printed circuit board by onlineknudsen, from the onlineknudsen/SeniorProjectVSC-3phSensor repository on GitHub. It is a 4-layer board of 96.5 × 66.5 mm with 53 parts on 53 nets, routed with 524 tracks and 805 vias.
It is built around the TMCS1108A3UQDRQ1 and ATM90E32AS-AU-R. Its parts include 23 resistors, 15 capacitors, 12 connectors, 2 ICs and 1 crystal.
Main components
2
TMCS1108A3UQDRQ1
SOIC-8-2.25A~21.5A -40℃~+125℃ 1.8mΩ 200mV/A 3V~5.5V 6.5us 80kHz Not supported Overcurrent Protection、Bidirectional detection SOIC-8 Current Sensors ROHSTexas InstrumentsCurrent Sensors
ATM90E32AS-AU-R
TQFP-48(7x7)-40℃~+85℃ 0.1% 13mA 16.384MHz 2.8V~3.6V 6 6000:1 6ppm/℃ Polyphase Energy Metering IC SPI TQFP-48(7x7) Energy Metering ROHSMicrochip TechnologyEnergy Metering
README
README.mdView this project on CADLAB.io.
Senior Project - Voltage Sourced Converter - 3 phase Power Sensor
Lin Knudsen, Thomas Mack, Nikhil Patel
Chip: Atmel M90E32AS Enhanced Poly-Phase High-Performance Wide-Span Energy Metering IC
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1800pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 9 | 1kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R14, R15, R16, R19, R20, R22 |
| 6 | 2.4ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R17, R18 |
| 3 | 16.9kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 3 | 4Mohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 1 | +3.3V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J18 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 16.9k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | AC Current Header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J20 |
| 1 | AC Sensor Header | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J1 |
| 1 | ATM90E32AS-AU-R | ATM90E32AS_AU_R:TQFP48_7x7MC_MCH-M | U1 |
| 1 | Crystal | ABLS_16_384MHZ_B4_T:XTAL_ABLS-16.384MHZ-B4-T | Y1 |
| 1 | DC Current and Voltage Sensors | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | DC_I_N | Connector:Banana_Jack_1Pin | J13 |
| 1 | DC_I_P | Connector:Banana_Jack_1Pin | J12 |
| 1 | GND Header | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J19 |
| 1 | GND Jack | Connector:Banana_Jack_1Pin | J17 |
| 1 | TMCS1108A3UQDR | TMCS1108A3U:D0008A-IPC_A | U2 |
| 1 | UA | Connector:Banana_Jack_1Pin | J2 |
| 1 | UB | Connector:Banana_Jack_1Pin | J3 |
| 1 | UC | Connector:Banana_Jack_1Pin | J4 |
| 1 | UN | Connector:Banana_Jack_1Pin | J11 |
Similar boards
- 4 layers102.6 × 148 mm
- 2 layers185 × 126.1 mm
WattMeter
Mourty/Wattmeter-Project
This is a repo for a class project about making a wattmeter. Enjoy it if you want to aswell.
80 parts - 2 layers80.5 × 45.1 mm
Ra5 2022
pedrohqr/ra5_2022_m
Base/carrier board for a modular PLC (Programmable Logic Controller): an I/O front-end with no main MCU of its own — sensing and metering peripherals are driven by a separate MCU+LTE modem card that plugs into the…
154 parts - 4 layers62.5 × 83.8 mm
- 2 layers192 × 166.6 mm
Super Capacitor measurement
Dixit-Golakiya/Master-Thesis-Project
Custom 2-layer PCB (192 mm × 166 mm) built around a NUCLEO-G474RE evaluation board, providing all sensing and excitation circuitry for the supercapacitor health monitoring system.
181 parts - 2 layers
- 2 layers177 × 106 mm
Control pcb
bot-hoven/bot-hoven-electrical
Electrical substem for Bot-Hoven. Includes KiCad files containing schematics and PCB designs for components in Bot-Hoven.
74 parts
Questions
How big is the SeniorProjectVSC-3phSensor PCB?
It measures 96.5 × 66.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SeniorProjectVSC-3phSensor use?
53 parts, built around the TMCS1108A3UQDRQ1 and ATM90E32AS-AU-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SeniorProjectVSC-3phSensor KiCad files?
From the onlineknudsen/SeniorProjectVSC-3phSensor repository on GitHub, at the commit this page was made from: the board is SeniorProjectVSC-3phSensor.kicad_pcb and its schematic SeniorProjectVSC-3phSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SeniorProjectVSC-3phSensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask onlineknudsen before reusing the design.