omarothman2004/Boost-Converter1A 12V, LT1302-based step-up DC-DC converter board made for efficient voltage boosting with optimized inductor selection and low-noise layout routing.
Boost Converter is an open-source printed circuit board by omarothman2004, from the omarothman2004/Boost-Converter repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.3 × 39.8 mm with 20 parts on 7 nets, routed with 86 tracks and 30 vias.
It is built around the MBRS340. Its parts include 4 resistors, 2 capacitors, 1 IC, 1 diode and 1 connector. It belongs with the power boards of this library.
This repository houses the schematic and layout files for a step-up (boost) power converter in KiCad.
/schematic: KiCad project schematic files./layout: Board layout and 3D step models./manufacturing: Gerber files, drill files, and Bill of Materials (BOM).| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | MH1, MH2, MH3, MH4 |
| 1 | 0.01µ | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | 100µ | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 20K | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 240 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 3.3µ | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 86.6k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | LT1302 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
| 1 | MBRS340 | Diode_SMD:ST_D_SMC | D1 |
It measures 50.3 × 39.8 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the MBRS340. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the omarothman2004/Boost-Converter repository on GitHub, at the commit this page was made from: the board is kicad/Boost Converter.kicad_pcb and its schematic kicad/Boost Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.
jimbro1000/CoCoDragonMultiPak
This repository contains the designs for a Dragon 32/64 multipak interface based closely on the TRS-80 Color Computer multipak system.
rzuehlsd/VT100-Terminal-on-Bare-Metal-Pi-Zero
This is a bare metal implementation of a VT100 terminal based on the work of Filippo Bergamasco (https://github.com/fbergama/pigfx).
