2 layers290.1 × 130 mm
2 layers42 × 25 mm
Esp programmer
OlukaGibson/esp_programmerThis is the esp programmer with KICAD software
- Size
- 42 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 10
- Pads
- 38
- Tracks, vias
- 82, 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Aug 2024
- Updated
- 18 Nov 2024
Overview
Esp programmer is an open-source printed circuit board by OlukaGibson, from the OlukaGibson/esp_programmer repository on GitHub. It is a 2-layer board of 42 × 25 mm with 9 parts on 10 nets, routed with 82 tracks and 5 vias.
It is built around the AMS1117-3.3. Its parts include 2 capacitors, 2 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10U | Capacitor_SMD:C_0201_0603Metric | C1, C2 |
| 1 | 220 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | I01 | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | I1 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | RST | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | RST1 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J1 |
Questions
How big is the Esp programmer PCB?
It measures 42 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp programmer use?
9 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp programmer KiCad files?
From the OlukaGibson/esp_programmer repository on GitHub, at the commit this page was made from: the board is esp_programmer.kicad_pcb and its schematic esp_programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask OlukaGibson before reusing the design.
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407