2 layers63.5 × 58 mm
Latest
minipadKB/minipad
The PCB and case files for the minipad, an RP2040-based 2-3-key keypad for the rhythm game osu!.
39 parts52GPL-3.0
2 layers352.1 × 121.7 mm
Test2
oliver-macC/test2custom 104 keyboard
- Size
- 352.1 × 121.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 214
- Nets
- 146
- Pads
- 1,148
- Tracks, vias
- 1,319, 167
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Apr 2024
- Updated
- 20 Sep 2024
Overview
Test2 is an open-source printed circuit board by oliver-macC, from the oliver-macC/test2 repository on GitHub. It is a 2-layer board of 352.1 × 121.7 mm with 214 parts on 146 nets, routed with 1,319 tracks and 167 vias.
It is built around the RP2040, W25Q128JVSIQ and SRV05-4. Its parts include 87 diodes, 16 capacitors, 9 resistors, 6 switches and 4 ICs. It belongs with the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
Parts
214| Qty | Value | Footprint | References |
|---|---|---|---|
| 87 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +71 |
| 76 | 1u | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX2, MX10, MX11, MX12, MX13, MX14, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24, MX25 +60 |
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C7, C10, C11, C12, C13, C14, C15, C16 |
| 7 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R6, R8, R9 |
| 6 | 1.25u | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.25u | MX15, MX78, MX79, MX80, MX82, MX83 |
| 4 | 22p | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5 |
| 3 | 1.5u | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.5u | MX32, MX45, MX84 |
| 3 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.25u | S2, S3, S4 |
| 2 | 1.75u | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.75u | MX28, MX49 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C9 |
| 2 | Switch | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Fuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_6.25u | S1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | SRV05-4 | PCM_marbastlib-various:SOT-23-6-routable | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U1 |
Questions
How big is the Test2 PCB?
It measures 352.1 × 121.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Test2 use?
214 parts, built around the RP2040, W25Q128JVSIQ and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Test2 KiCad files?
From the oliver-macC/test2 repository on GitHub, at the commit this page was made from: the board is test2.kicad_pcb and its schematic LED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Test2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask oliver-macC before reusing the design.
Similar boards
- 2 layers224.4 × 97.8 mm
Knobdeavour
ScatteredDrifter/Buran-Ortho
A 39-key orthogonal keyboard with support for two knobs, based on a rp2040
105 parts46 - 2 layers253.3 × 113.3 mm
- 2 layers344.7 × 123.6 mm
- 2 layers346.1 × 118.3 mm
- 2 layers236.9 × 86.8 mm
- 2 layers346.1 × 93.7 mm
Sifrl main pcb
ramonimbao/SpaceInvadersFRL
An F-rowless TKL keyboard case, plate, and PCB that uses the HiTek Series 725 switches.
177 parts15 - 2 layers309.6 × 76.2 mm
Q9-Chimera
xommmmmmmm/QueueNineChimera
A drop-in, multi-layout (ortho/row/alpha stagger) PCB with numpad for Keychron Q9
201 parts15