4 layers25.4 × 53.3 mm
RT1010Py Rev.C
OLIMEX/RT1010Py
RT1010Py is Cortex-M7 running at 500Mhz MicroPython board
89 parts6GPL-3.0
2 layers50.8 × 62.2 mm
ESP32-GATEWAY Rev I
OLIMEX/ESP32-GATEWAY322ESP32 IoT Gateway board with BLE WIFI and Ethernet
- Size
- 50.8 × 62.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 111
- Nets
- 99
- Pads
- 419
- Tracks, vias
- 1,934, 287
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Jun 2017
- Updated
- 19 Jan 2026
Overview
ESP32-GATEWAY Rev I is an open-source printed circuit board by OLIMEX, from the OLIMEX/ESP32-GATEWAY repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 50.8 × 62.2 mm with 111 parts on 99 nets, routed with 1,934 tracks and 287 vias.
It is built around the ESP32-WROOM-32E-N4, LAN8710A-EZC-ABC and GG0402052R542P, with the WPM2015-3/TR and LMUN2211LT1G among its other parts. Its parts include 39 resistors, 21 capacitors, 7 diodes, 4 ICs and 4 inductors. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
5
ESP32-WROOM-32E-N4
SMD,25.5x18mm-40℃~+85℃ -98dBm 112mA 2.4GHz 20dBm 239mA 3V~3.6V Bluetooth4.2 ESP32-D0WD-V3、ESP32-D0WDR2-V3 On-board PCB Antenna UART、SDIO、SPI、I2C、GPIO SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
LAN8710A-EZC-ABC
QFN-32-EP(5x5)0℃~+85℃ 1.6V~3.6V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s Ethernet Transceiver MII、RMII Programmable LED indication、Low-power mode、Power-on reset、Error detection and recovery QFN-32-EP(5x5) Ethernet Transceivers ROHSMicrochip TechnologyEthernet Transceivers
GG0402052R542P
0402-55℃~+125℃ 100nA 15.5V 2.5pF 3A@8/20us 46W@8/20us 5.5V 5V ESD IEC 61000-4-2、IEC 61000-4-4 0402 ESD and Surge Protection (TVS/ESD) ROHSKyocera AVXESD And Surge Protection (TVS/ESD)
WPM2015-3/TR
SOT-231 P-Channel 1.1W 110mΩ@4.5V 1V 2.4A 20V 534pF 54pF 62pF 7.3nC@4.5V P-Channel ±8V SOT-23 MOSFETs ROHSKUUMOSFETsLMUN2211LT1G
SOT-23-55℃~+150℃ 1 1 NPN (Pre-Biased) 100mA 100nA 10kΩ 200mV 246mW 250mV 35 50V NPN SOT-23 Digital Transistors ROHSLeshan Radio (LRC)Digital Transistors
README
README.mdESP32-GATEWAY
ESP32 WiFi / BLE development board with Ethernet, microSD card, GPIOs, made with KiCAD
Board page: https://www.olimex.com/Products/IoT/ESP32/ESP32-GATEWAY/open-source-hardware
Hardware is released under Apache 2.0 License
Box design is released under CC BY 4.0 License
Software is released under GPL3 License
Documentation is released under CC BY-SA 3.0
Parts
111| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R6, R24, R29, R35, R38, R40, R45 |
| 6 | 100nF/50V/20%/Y5V/C0603 | OLIMEX_RLC-FP:C_0603_5MIL_DWS | C11, C13, C14, C15, C17, C24 |
| 6 | 2.2k/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R1, R2, R3, R4, R7, R8 |
| 5 | 22uF/6.3V/20%/X5R/C0603 | OLIMEX_RLC-FP:C_0603_5MIL_DWS | C2, C8, C9, C12, C23 |
| 4 | 49.9R/1%/R0402 | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R28, R31, R32, R33 |
| 4 | GG0402052R542P | OLIMEX_Diodes-FP:D_0402_5MIL_DWS | TVS1, TVS2, TVS3, TVS4 |
| 4 | NA/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R9, R10, R11, R46 |
| 3 | 1N5819S4/SOD123 | OLIMEX_Diodes-FP:SOD-123_1C-2A_KA | D1, D3, D5 |
| 3 | 1k/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R5, R41, R42 |
| 3 | 220R/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R14, R16, R37 |
| 3 | 47uF/6.3V/20%/X5R/C0805 | OLIMEX_RLC-FP:C_0805_5MIL_DWS | C1, C4, C10 |
| 2 | OLIMEX_LOGOs-FP:OLIMEX_LOGO_TB | Logo-OLimeX, Logo-OlimexBIG | |
| 2 | 330R/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R26, R27 |
| 2 | 5.1k/1%/R0402 | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R13, R15 |
| 2 | 600OHM/2A/UPZ2012E-601-2R0TF | OLIMEX_RLC-FP:L_0805_5MIL_DWS | L3, L4 |
| 2 | BC817-40(SOT23) | OLIMEX_Transistors-FP:SOT23 | Q4, Q5 |
| 2 | Fiducial | OLIMEX_Other-FP:Fiducial1x3 | FID1, FID3 |
| 2 | Fiducial | OLIMEX_Other-FP:Fiducial1x3_Past | FID2, FID4 |
| 2 | Mounting_hole_Shield_3.3mm | OLIMEX_Other-FP:Mounting_hole_Shield_3.3mm | MH1, MH2 |
| 2 | Opened | OLIMEX_Jumpers-FP:SJ | GPIO17_E1, PHY_RST1 |
| 2 | RA1206_(4X0603)_4B8_2.2k | OLIMEX_RLC-FP:R_MATRIX_4 | RM2, RM3 |
| 2 | T1107A(6x3,8x2,5MM) | OLIMEX_Buttons-FP:T1107A(6x3,8x2,5MM) | BUT1, RST1 |
| 2 | WPM2015-3/TR | OLIMEX_Transistors-FP:SOT23 | FET1, FET2 |
| 1 | OLIMEX_LOGOs-FP:LOGO_RECYCLEBIN_1 | Sign-RecyclBin | |
| 1 | OLIMEX_LOGOs-FP:LOGO_PBFREE | Sign_Pb-Free | |
| 1 | OLIMEX_LOGOs-FP:LOGO_OPENHARDWARE_8x8 | Logo-OSHW | |
| 1 | 0R(Board_Mounted) | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R25 |
| 1 | 1.0uH/2.5A/DCR=30mR/20%/3.00x3.00x1.50mm/CD32(SWPA3015S1R0MT) | OLIMEX_RLC-FP:CD32 | L2 |
| 1 | 10R/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R43 |
| 1 | 12.1k/1%/R0402 | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R39 |
| 1 | 1M/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R30 |
| 1 | 1N5822/SS34/SMA | OLIMEX_Diodes-FP:SMA-KA | D6 |
| 1 | 1nF/2000V/10%/X7R/C1206 | OLIMEX_RLC-FP:C_1206_5MIL_DWS_ISO | C19 |
| 1 | 1uF/C0603 | OLIMEX_RLC-FP:C_0603_5MIL_DWS | C5 |
| 1 | 2.2uF/6.3V/10%/X5R/C0603 | OLIMEX_RLC-FP:C_0603_5MIL_DWS | C16 |
| 1 | 220k/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R19 |
| 1 | 33R/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R12 |
| 1 | 4.7k/R0402 | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R17 |
| 1 | 49.9k/1%/R0603 | OLIMEX_RLC-FP:R_0603_5MIL_DWS | R20 |
| 1 | BAT54C(SOT23-3) | OLIMEX_Diodes-FP:SOT23-3 | D4 |
| 1 | CE_Sign | OLIMEX_Signs-FP:CE_Sign | Sign_CE |
| 1 | CH340X(MSOP-10) | OLIMEX_IC-FP:MSOP-10_Pitch-0.5mm_3.00x3.00x1.00mm | U5 |
| 1 | Closed | OLIMEX_Jumpers-FP:SJ | LED_E1 |
| 1 | ESP32-WROOM-32E-N4 | OLIMEX_Cases-FP:ESP-WROOM-32_MODULE | U3 |
| 1 | LAN8710A-EZC-ABC | OLIMEX_IC-FP:QFN32_EP(33)_5.00x5.00x0.90mm_Pitch_0.50mm | U4 |
| 1 | LED/GREEN/0603 | OLIMEX_LEDs-FP:LED_0603_KA | LED1 |
| 1 | LED/RED/0603 | OLIMEX_LEDs-FP:LED_0603_KA | PWRLED1 |
| 1 | LMUN2211LT1G | OLIMEX_Transistors-FP:SOT23 | T1 |
| 1 | NA(10uF/6.3V/20%/X5R/C0603) | OLIMEX_RLC-FP:C_0603_5MIL_DWS | C18 |
| 1 | NA(1nF/2000V/10%/X7R/C1206) | OLIMEX_RLC-FP:C_1206_5MIL_DWS_ISO | C20 |
| 1 | NA(47uF/6.3V/20%/X5R/C0805) | OLIMEX_RLC-FP:C_0805_5MIL_DWS | C3 |
| 1 | NA(FB0805/600R/2A) | OLIMEX_RLC-FP:L_0805_5MIL_DWS | L1 |
| 1 | NA(HN1x20) | OLIMEX_Connectors-FP:HN1x20 | CON1 |
| 1 | NA/C0402 | OLIMEX_RLC-FP:C_0402_5MIL_DWS | C6 |
| 1 | RJLD-060TC1(LPJ4013EDNL) | OLIMEX_Connectors-FP:RJLBC-060TC1 | LAN1 |
| 1 | SMBJ6.0A(DO-214AA) | OLIMEX_Diodes-FP:DO214AA_1(K)-2(A) | D2 |
| 1 | TESTPAD | OLIMEX_Other-FP:TESTPAD_40-ROUND | GND1 |
| 1 | TFC-WXCP11-08-LF | OLIMEX_Connectors-FP:TFC-WXCP11-08-LF | MICRO_SD1 |
| 1 | TPS62A02ADRLR(SOT-563-6) | OLIMEX_Regulators-FP:SOT-563-6 | U1 |
| 1 | USB-C-16P-F-PTH | OLIMEX_Connectors-FP:USB2.0_TYPE-C(A40-00119-A52-12) | USB-UART1 |
| 1 | Val** | OLIMEX_LOGOs-FP:LOGO_ANTISTATIC_1 | Sign-Antistatic |
| 1 | Val** | OLIMEX_LOGOs-FP:LOGO_ROHS_1 | Sign_RoHS |
Questions
How big is the ESP32-GATEWAY Rev I PCB?
It measures 50.8 × 62.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-GATEWAY Rev I use?
111 parts, built around the ESP32-WROOM-32E-N4, LAN8710A-EZC-ABC, GG0402052R542P and WPM2015-3/TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-GATEWAY Rev I KiCad files?
From the OLIMEX/ESP32-GATEWAY repository on GitHub, at the commit this page was made from: the board is HARDWARE/Hardware revision I/ESP32-GATEWAY_Rev_I.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-GATEWAY Rev I design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers82.5 × 45 mm
Eumesmo poe-2rl v1
thermseekr/eumesmo-poe-2rl
PoE-powered ESP32 controller featuring 2x onboard SPST NO relays. Ideal for access control, doors, or isolated zones.
109 parts - 2 layers75.2 × 74.7 mm
ESP32-EVB Rev K2
OLIMEX/ESP32-EVB
ESP32 WiFi / BLE Development board with Ethernet interface, Relays, microSD card
170 parts287Apache-2.0 - 2 layers
- 4 layers50 × 85 mm
- 6 layers20 × 24 mm
Datalogger V4 REV2
wngandu/datalogger-pcb
KiCad hardware design for the Datalogger V4 REV2 board
65 parts - 2 layers27 × 24.7 mm
- 2 layers325.5 × 240.1 mm
