6 layers60 × 60 mm
High Temp Load Cell Toolhead Board
garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220
125 parts23GPL-3.0
2 layers
Bb ads1220 old
OLIMEX/BB-ADS122016OSHW Open Source Hardware breakboard for ADS1220 Low Power Preciese 24-bit ADC from Texas Instruments
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 15
- Pads
- 38
- Tracks, vias
- 4, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Jun 2015
- Updated
- 29 Apr 2020
Overview
Bb ads1220 old is an open-source printed circuit board by OLIMEX, from the OLIMEX/BB-ADS1220 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 9 parts on 15 nets, routed with 4 tracks and 0 vias.
It is built around the ADS1220. Its parts include 3 capacitors and 1 IC.
Main components
1README
README.mdBB-ADS1220
OSHW Open Source Hardware breakboard for ADS1220 Low Power Preciese 24-bit ADC from Texas Instruments
Licensee
- Hardware is released under CERN Open Hardware Licence Version 2 - Strongly Reciprocal
- Software is released under GPL3 Licensee
- Documentation is released under CC BY-SA 3.0
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 104 | kicad_wrk:C_0603 | C1, C2, C3 |
| 2 | CONN_01X08 | kicad_wrk:SIP8_Housing | , |
| 1 | kicad_wrk:LOGO_PBFREE_33 | ||
| 1 | kicad_wrk:LOGO_OLIMEX_140 | ||
| 1 | ADS1220 | kicad_wrk:TSSOP-16_4.4x5mm_Pitch0.65mm | U1 |
| 1 | LOGO | kicad_wrk:LOGO_STATIC_150 | G*** |
Questions
What parts does the Bb ads1220 old use?
9 parts, built around the ADS1220. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bb ads1220 old KiCad files?
From the OLIMEX/BB-ADS1220 repository on GitHub, at the commit this page was made from: the board is HARDWARE/BB-ADS1220_Rev.A/bb-ads1220_old.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bb ads1220 old design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers85 × 55 mm
- 4 layers75 × 84.8 mm
- 2 layers85 × 60 mm
- 2 layers80 × 50 mm
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
22 parts - 2 layers21.6 × 19 mm
- 2 layers103 × 30.5 mm
- 2 layers31.8 × 47.6 mm
