
Coinmatrix battery
olell/CoinMatrix
CR2032 sized 8x8 pixel LED matrix driven by a CH32V003

CR2032 sized 8x8 pixel LED matrix driven by a CH32V003
Coinmatrix is an open-source printed circuit board by olell, from the olell/CoinMatrix repository on GitHub, published under the MIT licence. It is a 4-layer board of 34.8 × 25.2 mm with 64 parts on 20 nets, routed with 927 tracks and 210 vias.
Its parts include 60 diodes, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards and the RISC-V boards of this library.
CR2032 sized 8x8 pixel LED matrix driven by a CH32V003. This repo contains firmware and hardware design files.
To build the firmware use the Makefile in the firmware subdirectory. To build the project you need to clone ch32fun which is included as submodule in this repo. To do that, run this command:
git submodule update --initto build to firmware binary and flash it simply run make inside the firmware
directory.
You can find KiCad design files for the current hardware revision in the hardware/ folder. ⚠️ V2 is currently untested and might have errors!
To view the projects in your browser you can use KiCanvas:

The hardware is licensed under CC BY-NC 4.0 you can find a copy of the license text in the LICENSE_HARDWARE file.
The firmware source code is licensed under MIT license, you can find a copy of the license text in the LICENSE file.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 60 | LED_RABG | olelib:LED-SMD-4P,1.2x1.2mm | D102, D103, D104, D106, D107, D108, D109, D111, D112, D113, D114, D116, D117, D118, D119, D121 +44 |
| 2 | VAL** | Panelization:mouse-bite-2mm-slot | mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C101 |
| 1 | CH32V003FxUx | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U101 |

olell/CoinMatrix
CR2032 sized 8x8 pixel LED matrix driven by a CH32V003

MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver


MelkhiorVintageComputing/SBusFPGA
Stuff to put a FPGA in a SBus system (SPARCstation)


andreika-git/hellen-one
Hellen-One Hardware Platform for rusEFI Engine Management System

martinberlin/bistable-smart-switch
An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)

atopile/hil
Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

It measures 34.8 × 25.2 mm and has 4 copper layers, 0.8 mm thick.
64 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the olell/CoinMatrix repository on GitHub, at the commit this page was made from: the board is hardware/coinmatrix/coinmatrix.kicad_pcb and its schematic hardware/coinmatrix/coinmatrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).