Skip to the content
4 layers34.8 × 25.2 mmCoinmatrix, the printed circuit board in 3D

CR2032 sized 8x8 pixel LED matrix driven by a CH32V003

Size
34.8 × 25.2 mm
Copper layers
4
Thickness
0.8 mm
Parts
64
Nets
20
Pads
279
Tracks, vias
927, 210
Pours
13
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
6 Jun 2025
Updated
26 Jun 2025

Overview

Coinmatrix is an open-source printed circuit board by olell, from the olell/CoinMatrix repository on GitHub, published under the MIT licence. It is a 4-layer board of 34.8 × 25.2 mm with 64 parts on 20 nets, routed with 927 tracks and 210 vias.

Its parts include 60 diodes, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards and the RISC-V boards of this library.

README

README.md

CoinMatrix

CR2032 sized 8x8 pixel LED matrix driven by a CH32V003. This repo contains firmware and hardware design files.

Build the firmware

To build the firmware use the Makefile in the firmware subdirectory. To build the project you need to clone ch32fun which is included as submodule in this repo. To do that, run this command:

text
git submodule update --init

to build to firmware binary and flash it simply run make inside the firmware directory.

Hardware

You can find KiCad design files for the current hardware revision in the hardware/ folder. ⚠️ V2 is currently untested and might have errors!

To view the projects in your browser you can use KiCanvas:

Version 1 Pictures

front side back side

License

The hardware is licensed under CC BY-NC 4.0 you can find a copy of the license text in the LICENSE_HARDWARE file.

The firmware source code is licensed under MIT license, you can find a copy of the license text in the LICENSE file.

Parts

64
QtyValueFootprintReferences
60LED_RABGolelib:LED-SMD-4P,1.2x1.2mmD102, D103, D104, D106, D107, D108, D109, D111, D112, D113, D114, D116, D117, D118, D119, D121 +44
2VAL**Panelization:mouse-bite-2mm-slotmouse-bite-2mm-slot, mouse-bite-2mm-slot
1100nFCapacitor_SMD:C_0402_1005MetricC101
1CH32V003FxUxPackage_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mmU101

More from olell/CoinMatrix

1
  • 2 layers34.8 × 25.2 mmCoinmatrix battery, the printed circuit board in 3D

    Coinmatrix battery

    olell/CoinMatrix

    CR2032 sized 8x8 pixel LED matrix driven by a CH32V003

    19 parts1MIT

Similar boards

  • 4 layers100 × 54 mm32Bit shift register, the printed circuit board in 3D

    32Bit shift register

    MaltWhiskey/Mega-Cube

    16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

    64 parts766
  • 4 layers38.6 × 39.5 mmRuuvitag revb71, the printed circuit board in 3D

    Ruuvitag revb71

    ruuvi/ruuvitag_hw

    RuuviTag hardware projects

    64 parts115
  • 4 layers99.7 × 83.8 mmSbus to ztex, the printed circuit board in 3D

    Sbus to ztex

    MelkhiorVintageComputing/SBusFPGA

    Stuff to put a FPGA in a SBus system (SPARCstation)

    64 parts54
  • 4 layers105.4 × 54.6 mmNVM RP CHG, the printed circuit board in 3D

    NVM RP CHG

    curtisseizert/Nanovoltmeter

    A low noise nanovoltmeter design files and code

    64 parts44
  • 4 layers24.6 × 14 mmHellen1-wbo, the printed circuit board in 3D

    Hellen1-wbo

    andreika-git/hellen-one

    Hellen-One Hardware Platform for rusEFI Engine Management System

    64 parts38
  • 4 layers70.2 × 71 mmC3-27-epaper touch, the printed circuit board in 3D

    C3-27-epaper touch

    martinberlin/bistable-smart-switch

    An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)

    64 parts32Apache-2.0
  • 4 layersCell, the printed circuit board in 3D

    Cell

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    64 parts29MIT
  • 4 layers67.3 × 48.5 mmRAM2GS, the printed circuit board in 3D

    RAM2GS

    garrettsworkshop/RAM2GS

    8 MB RAM expansion card for Apple IIgs

    64 parts26

Questions

How big is the Coinmatrix PCB?

It measures 34.8 × 25.2 mm and has 4 copper layers, 0.8 mm thick.

What parts does the Coinmatrix use?

64 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Coinmatrix KiCad files?

From the olell/CoinMatrix repository on GitHub, at the commit this page was made from: the board is hardware/coinmatrix/coinmatrix.kicad_pcb and its schematic hardware/coinmatrix/coinmatrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Coinmatrix design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).