Skip to the content
2 layers8 × 19 mmLed, the printed circuit board in 3D

Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Size
8 × 19 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
3
Pads
8
Tracks, vias
5, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Dec 2020
Updated
21 Oct 2026

Overview

Led is an open-source printed circuit board by ohmtech-rdi, from the ohmtech-rdi/eurorack-blocks repository on GitHub. It is a 2-layer board of 8 × 19 mm with 4 parts on 3 nets, routed with 5 tracks and 0 vias.

Its parts include 2 connectors, 1 resistor and 1 diode. It belongs with the audio and music boards and the STM32 boards of this library.

README

blocks/slider/README.md

slider

Description

This block is a simple potentiometer and LED in a slider form factor.

It is adapted from the Mutable Instuments Stages schematics.

Soldering

Pin headers don't come with just one position. Instead of that, the BOM has 2-position pin male headers that need to be broke into 2 pieces.

Usage

This block provides a silder potentiometer with a red LED.

Power

This modules needs to be connected to the 3V3A and GND lines from the power block.

On Daisy Seed, use the 3V3 Analog Power I/O on Pin 21, not the digital power.

All GND pins are internally connected in the block.

Signal

The signal IN drives the LED. It should be connected to any GPIO of the target MCU, preferably non-analog GPIOs.

The signal OUT is the potentiometer value. It should be connected to any Analog GPIO of the target MCU.

When using Daisy Seed as a development platform, see its pinout for details. The Daisy Seed has a total of 31 GPIOs, only 12 of which are analog.

Design

Gerber renders made with tracespace view.

Parts

4
QtyValueFootprintReferences
1100Resistor_SMD:R_0603_1608MetricR1
1GNDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1INConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1LEDLED_THT:LED_D3.0mmD1

More from ohmtech-rdi/eurorack-blocks

12
  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers59.6 × 109.5 mmKivu12, the printed circuit board in 3D

    Kivu12

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    136 parts410
  • 2 layers59.6 × 109.5 mmKivu12, the printed circuit board in 3D

    Kivu12

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    80 parts410
  • 2 layers59.6 × 109.5 mmDrop, the printed circuit board in 3D

    Drop

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    40 parts410
  • 2 layers59.6 × 109.5 mmCustom, the printed circuit board in 3D

    Custom

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    17 parts410
  • 2 layers59.6 × 109.5 mmCustom, the printed circuit board in 3D

    Custom

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    14 parts410
  • 2 layers25 × 19 mmAudio in daisy, the printed circuit board in 3D

    Audio in daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers25 × 19 mmAudio out daisy, the printed circuit board in 3D

    Audio out daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers25 × 19 mmCv in, the printed circuit board in 3D

    Cv in

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers37 × 21.5 mmPower bus, the printed circuit board in 3D

    Power bus

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    9 parts410
  • 2 layers20 × 19 mmGate in, the printed circuit board in 3D

    Gate in

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    8 parts410
  • 2 layers20 × 19 mmRegulator daisy, the printed circuit board in 3D

    Regulator daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    8 parts410

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Led PCB?

It measures 8 × 19 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Led use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led KiCad files?

From the ohmtech-rdi/eurorack-blocks repository on GitHub, at the commit this page was made from: the board is blocks/led/led.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led design in my own project?

Its repository states no licence, so its author keeps all rights: ask ohmtech-rdi before reusing the design.