Skip to the content
2 layers17.8 × 43.2 mmBL652-breakout, the printed circuit board in 3D
Size
17.8 × 43.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
90
Nets
37
Pads
138
Tracks, vias
186, 19
Pours
26
Routed
Yes
KiCad
KiCad 4
Created
12 Jan 2018
Updated
13 Jan 2018

Overview

BL652-breakout is an open-source printed circuit board by ogatatsu, from the ogatatsu/BL652-breakout repository on GitHub. It is a 2-layer board of 17.8 × 43.2 mm with 90 parts on 37 nets, routed with 186 tracks and 19 vias.

Its parts include 21 connectors, 4 capacitors, 3 resistors, 3 diodes and 1 IC. It belongs with the interfaces and adapters boards of this library.

README

README.md

BL652-breakout

LairdTechのnRF52832モジュールBL652のブレークアウト基板

Adafruit Feather nRF52のブートローダーを書き込むことを意識して設計してあり、書き込み後はArduino Pro Mini用のusbシリアル変換アダプタを挿せばArduinoで開発できます

1 2 3

部品表

NameQtyDescriptionManufacturer
U11BL652-SA-01LairdTech
Y11Crystal, FC-135, 32.768kHz, 9pFEPSON
C1,C42Capacitor, 0.1uF, 1608
C2,C32Capacitor, 12pF, 1608
R11Resistor, 1k Ohm, 1608
R21Resistor, 330 Ohm, 1608
R31Resistor, 10k Ohm, 1608
D11Diode, 1N4148WDiodes Incorporated
LED11Led, Red, 1608
LED21Led, Yellow Green, 1608

License

https://creativecommons.org/licenses/by/4.0/

Parts

90
QtyValueFootprintReferences
5GND.pretty:WirepadPGND1, PGND2, PGND3, PGND4, PGND5
20.1uF.pretty:1608C1, C4
212pF.pretty:1608C2, C3
2VDD.pretty:WirepadPVDD1, PVDD2
110K.pretty:1608R3
111.pretty:WirepadP11
112.pretty:WirepadP12
113.pretty:WirepadP13
114.pretty:WirepadP14
115.pretty:WirepadP15
116.pretty:WirepadP16
118.pretty:WirepadP18
11K.pretty:1608R1
12.pretty:WirepadP2
123.pretty:WirepadP23
124.pretty:WirepadP24
125.pretty:WirepadP25
126.pretty:WirepadP26
127.pretty:WirepadP27
128.pretty:WirepadP28
129.pretty:WirepadP29
13.pretty:WirepadP3
130.pretty:WirepadP30
131.pretty:WirepadP31
132.768kHz.pretty:FC-135Y1
1330.pretty:1608R2
14.pretty:WirepadP4
15.pretty:WirepadP5
17.pretty:WirepadP7
1BL652.pretty:BL652U1
1CLK.pretty:WirepadPCLK1
1D.pretty:DiodeD1
1DFU.pretty:CirclePDFU1
1DIO.pretty:WirepadPDIO1
1DTR.pretty:WirepadPDTR1
1FRST.pretty:CirclePFRST1
1NC.pretty:WirepadPNC2
1RED.pretty:1608LED1
1RST.pretty:WirepadPRST1
1RX.pretty:WirepadPRX1
1TX.pretty:WirepadPTX1
1YELLOW GREEN.pretty:1608LED2

The 49 most common of 90 parts.

Similar boards

  • 2 layers75 × 75 mmFtp, the printed circuit board in 3D

    Ftp

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    90 parts3.7k
  • 2 layers236.5 × 96.2 mmForager pcb, the printed circuit board in 3D

    Forager pcb

    carrefinho/forager

    34-key wireless split keyboard inspired by ZSA Voyager

    90 parts426CERN-OHL-P-2.0
  • 2 layers268 × 62 mmSmu front 1, the printed circuit board in 3D

    Smu front 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    90 parts244
  • 2 layers97.5 × 59.5 mmChrono, the printed circuit board in 3D

    Chrono

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    90 parts208
  • 2 layers115.6 × 106.7 mmErgoSNM v3 left, the printed circuit board in 3D

    ErgoSNM v3 left

    siderakb/ergo-snm-keyboard

    ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

    90 parts172CERN-OHL-P-2.0
  • 2 layers163 × 120 mmZynthian mini, the printed circuit board in 3D

    Zynthian mini

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    90 parts156
  • 2 layers219 × 96.1 mmTheENDGAME2024 COPPER, the printed circuit board in 3D

    TheENDGAME2024 COPPER

    OldMan6955/TheEndgame2024

    Love Peace UWU

    90 parts121CERN-OHL-S-2.0

Questions

How big is the BL652-breakout PCB?

It measures 17.8 × 43.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BL652-breakout use?

90 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BL652-breakout KiCad files?

From the ogatatsu/BL652-breakout repository on GitHub, at the commit this page was made from: the board is BL652 breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BL652-breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask ogatatsu before reusing the design.