2 layers30 × 61.3 mm
2 layers120 × 142.2 mm
- Size
- 120 × 142.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 80
- Pads
- 454
- Tracks, vias
- 614, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Feb 2023
- Updated
- 21 Nov 2023
Overview
Pix80 is an open-source printed circuit board by OfficialPixelBrush, from the OfficialPixelBrush/Pix80PCB repository on GitHub. It is a 2-layer board of 120 × 142.2 mm with 45 parts on 80 nets, routed with 614 tracks and 0 vias.
Its parts include 10 capacitors, 10 resistors, 8 ICs, 8 connectors and 1 diode.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 4.7mF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C3, C4, C5, C6, C7, C8, C9, C10 |
| 8 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R4, R5, R6, R7, R8, R9, R10 |
| 2 | 5.1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 4Bit DFF | Package_DIP:DIP-16_W7.62mm_Socket | U7 |
| 1 | 680uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C2 |
| 1 | 8MHz | Oscillator:Oscillator_DIP-14 | X1 |
| 1 | CPU | Package_DIP:DIP-40_W15.24mm_Socket | U1 |
| 1 | Clock Jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | EEPROM | Socket:DIP_Socket-28_W11.9_W12.7_W15.24_W17.78_W18.5_3M_228-1277-00-0602J | U2 |
| 1 | Expansion01 | Connector_PinSocket_2.54mm:PinSocket_2x21_P2.54mm_Vertical | J4 |
| 1 | Expansion02 | Connector_PinSocket_2.54mm:PinSocket_2x21_P2.54mm_Vertical | J5 |
| 1 | Expansion03 | Connector_PinSocket_2.54mm:PinSocket_2x21_P2.54mm_Vertical | J7 |
| 1 | Expansion04 | Connector_PinSocket_2.54mm:PinSocket_2x21_P2.54mm_Vertical | J8 |
| 1 | IO Demux | Package_DIP:DIP-16_W7.62mm_Socket | U8 |
| 1 | IOEN | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | MEMEN | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | MNT1 | MountingHole:MountingHole_2.5mm_Pad_Via | H1 |
| 1 | MNT2 | MountingHole:MountingHole_2.5mm_Pad_Via | H2 |
| 1 | MNT3 | MountingHole:MountingHole_2.5mm_Pad_Via | H3 |
| 1 | MNT4 | MountingHole:MountingHole_2.5mm_Pad_Via | H4 |
| 1 | Mem Demux | Package_DIP:DIP-16_W7.62mm_Socket | U6 |
| 1 | NAND | Package_DIP:DIP-14_W7.62mm_Socket | U4 |
| 1 | NOT | Package_DIP:DIP-14_W7.62mm_Socket | U5 |
| 1 | Power Toggle Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | RAM | Package_DIP:DIP-28_W15.24mm_Socket | U3 |
| 1 | USB Power Plug | Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
Questions
How big is the Pix80 PCB?
It measures 120 × 142.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pix80 use?
45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pix80 KiCad files?
From the OfficialPixelBrush/Pix80PCB repository on GitHub, at the commit this page was made from: the board is Pix80.kicad_pcb and its schematic Pix80.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pix80 design in my own project?
Its repository states no licence, so its author keeps all rights: ask OfficialPixelBrush before reusing the design.
Similar boards
- 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm
- 2 layers63.5 × 63.5 mm
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm
RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0 - 2 layers116.1 × 94.7 mm
