FullAdder
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
PASS-2-4 is an open-source printed circuit board by OfficialPixelBrush, from the OfficialPixelBrush/PASS-2-4 repository on GitHub. It is a 2-layer board of 34.4 × 24.2 mm with 14 parts on 10 nets, routed with 51 tracks and 2 vias.
Its parts include 5 diodes, 4 resistors, 2 transistors, 2 switches and 1 connector.
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and expandability in mind
![]()
![]()
![]()
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | D | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D2, D3, D4, D5 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 2 | Q_NPN_CBE | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2 |
| 2 | SW_SPDT | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW1, SW2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Conn_02x01 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 34.4 × 24.2 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OfficialPixelBrush/PASS-2-4 repository on GitHub, at the commit this page was made from: the board is KiCadFiles/revisedXOR/revisedXOR.kicad_pcb and its schematic KiCadFiles/FullAdder/FullAdder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OfficialPixelBrush before reusing the design.