Skip to the content
4 layers100 × 100 mmDevice test, the printed circuit board in 3D
Size
100 × 100 mm
Copper layers
4
Thickness
1.61 mm
Parts
25
Nets
32
Pads
126
Tracks, vias
209, 11
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Dec 2024
Updated
6 Jul 2025

Overview

Device test is an open-source printed circuit board by OE5XRX, from the OE5XRX/RemoteStation repository on GitHub. It is a 4-layer board of 100 × 100 mm with 25 parts on 32 nets, routed with 209 tracks and 11 vias.

Its parts include 7 resistors, 7 connectors, 3 capacitors and 3 diodes.

README

README.md

RemoteStation

Parts

25
QtyValueFootprintReferences
45k1Resistor_SMD:R_0805_2012MetricR201, R202, R301, R302
4MountingHoleMountingHole:MountingHole_3.2mm_M3H101, H102, H103, H104
3100u / 25VCapacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-XC101, C201, C301
3LEDLED_SMD:LED_0805_2012MetricD101, D201, D301
21kResistor_SMD:R_0805_2012MetricR203, R303
2USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ201, J301
12k2Resistor_SMD:R_0805_2012MetricR101
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ303
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ202
1Conn_02x10_Row_Letter_FirstPRJ:PCN10-20P-2.54DSJ203
1Conn_02x10_Row_Letter_FirstPRJ:PCN10C-20S-2.54DSJ302
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ101

The 24 most common of 25 parts.

More from OE5XRX/RemoteStation

4
  • 4 layers100 × 100 mmRemoteStation, the printed circuit board in 3D

    RemoteStation

    OE5XRX/RemoteStation

    71 parts1
  • 4 layers117.4 × 100 mmBus, the printed circuit board in 3D

    Bus

    OE5XRX/RemoteStation

    35 parts1
  • 4 layers100 × 100 mmPower, the printed circuit board in 3D

    Power

    OE5XRX/RemoteStation

    34 parts1
  • 4 layers100 × 100 mmCm4, the printed circuit board in 3D

    Cm4

    OE5XRX/RemoteStation

    33 parts1

Similar boards

  • 4 layers90 × 90 mmPower distribution, the printed circuit board in 3D

    Power distribution

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    25 parts1.4kCERN-OHL-S-2.0
  • 4 layers16 × 22.8 mmReadout 30pin top, the printed circuit board in 3D

    Readout 30pin top

    opentac/opentac

    OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.

    25 parts92MIT
  • 4 layers40 × 30.3 mmAPmini, the printed circuit board in 3D

    APmini

    ManiacalLabs/AllPixel

    Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.

    25 parts56MIT
  • 4 layers18.6 × 43.1 mmNfc sense, the printed circuit board in 3D

    Nfc sense

    unsurv/NFC_temp

    passive temperature NFC tag

    25 parts49
  • 4 layers63.5 × 27.9 mmTangNano9K5V, the printed circuit board in 3D

    TangNano9K5V

    ryomuk/tangnano-5V

    5V tolerant interface for Tang Nano

    25 parts45MIT
  • 4 layers18 × 13 mmMumo, the printed circuit board in 3D

    Mumo

    kounocom/Mumo

    A compact 13×18mm IMU module featuring the TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock and QST QMC6309H 3-axis magnetometer.

    25 parts41CERN-OHL-S-2.0
  • 4 layers13.6 × 19.4 mmMiniCO2, the printed circuit board in 3D

    MiniCO2

    nup002/miniCO2

    A miniature USB CO2 sensor

    25 parts40
  • 4 layers98.8 × 85.1 mmSsc, the printed circuit board in 3D

    Ssc

    jmthompson/ssc

    Simple Serial Card, an Apple Super Serial Card clone

    25 parts37

Questions

How big is the Device test PCB?

It measures 100 × 100 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Device test use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Device test KiCad files?

From the OE5XRX/RemoteStation repository on GitHub, at the commit this page was made from: the board is pcb/device_test/device_test.kicad_pcb and its schematic pcb/bus/bus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Device test design in my own project?

Its repository states no licence, so its author keeps all rights: ask OE5XRX before reusing the design.