2 layers15.5 × 47 mm
Velopath final
BananaGithubserfer/velopath
Разработка устройств велосипедной навигации velopath
66 partsGPL-3.0
2 layers46.9 × 50.8 mm
IP5389
oddwatcher/IP5389an IP5389 app
- Size
- 46.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 71
- Pads
- 355
- Tracks, vias
- 561, 70
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Jun 2022
- Updated
- 23 Jun 2022
Overview
IP5389 is an open-source printed circuit board by oddwatcher, from the oddwatcher/IP5389 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 46.9 × 50.8 mm with 67 parts on 71 nets, routed with 561 tracks and 70 vias.
It is built around the AMS1117-5.0, IP5389 and IPG20N04S4-08, with the 2SJ168-VB, SMF30A and 1SS355 among its other parts. Its parts include 22 capacitors, 22 resistors, 8 transistors, 5 connectors and 4 diodes.
Main components
6
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIP5389
QFN-64-EP(8x8)QFN-64-EP(8x8) USB PD ROHSINJOINICUSB PD
IPG20N04S4-08
TDSON-8-55℃~+175℃ 2 N-Channel 2.94nF 20A 36nC@10V 39pF 40V 4V 65W 7.6mΩ@10V TDSON-8 MOSFETs ROHSInfineon TechnologiesMOSFETs
2SJ168-VB
SOT-23(TO-236)-55℃~+150℃ 1 P-Channel 10pF 23pF 2V 2nC@15V 3Ω@10V 460mW 500mA 5pF 60V P-Channel SOT-23(TO-236) MOSFETs ROHSVBsemi ElecMOSFETs
SMF30A
SOD-123FL-55℃~+150℃ 1 1uA 200W@10/1000us 30V 36.8V 4.1A 48.4V TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSTWGMCESD And Surge Protection (TVS/ESD)
1SS355
SOD-3231.2V@100mA 100mA 100nA@80V 4ns 500mA 80V Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100R | Resistor_SMD:R_0805_2012Metric | R12, R15, R16, R17, R18, R19, R20 |
| 5 | 22uf | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7, C17, C18 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R14, R21, R22, R23 |
| 4 | 10uf | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C1, C2, C3, C4 |
| 4 | IPG20N04S4-08 | Package_SON_AKL:Infineon_PG-TDSON-8_Dual | Q1, Q2, Q3, Q4 |
| 3 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C11, C12, C15 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R4, R5, RNTC1 |
| 3 | 2.2nf | Capacitor_SMD:C_0805_2012Metric | C9, C14, C19 |
| 2 | 0.005R | Resistor_SMD:R_1206_3216Metric | R1, R9 |
| 2 | 100uf | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C8, C16 |
| 2 | 10R | Resistor_SMD:R_0805_2012Metric | R3, R8 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | 1uf | Capacitor_SMD:C_0805_2012Metric | C10, C13 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q6, Q8 |
| 2 | 2R | Resistor_SMD:R_1206_3216Metric | R2, R13 |
| 2 | 2SJ168 | Package_TO_SOT_SMD_AKL:SC-59 | Q5, Q7 |
| 2 | SMF30A | Diode_SMD_AKL:D_SOD-123F | D1, D3 |
| 2 | USB-C-PD-HRO | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2, J3 |
| 1 | 10uh | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | 1SS355 | Diode_SMD_AKL:D_SOD-323 | D4 |
| 1 | 2.2uf | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 27K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 3.6K | Resistor_SMD:R_0805_2012Metric | RPMAX1 |
| 1 | 6.2K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | Conn_01x06_Female | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | IP5389 | Package_DFN_QFN:QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm_ThermalVias | U1 |
| 1 | LED | Capacitor_SMD:C_0805_2012Metric | D2 |
| 1 | SW_DIP_x02 | Button_Switch_THT:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile | SW2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | USB_A_Stacked | Connector_USB:USB_A_Wuerth_61400826021_Horizontal_Stacked | J1 |
| 1 | XT60 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J4 |
Questions
How big is the IP5389 PCB?
It measures 46.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IP5389 use?
67 parts, built around the AMS1117-5.0, IP5389, IPG20N04S4-08 and 2SJ168-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IP5389 KiCad files?
From the oddwatcher/IP5389 repository on GitHub, at the commit this page was made from: the board is V4.0.kicad_pcb and its schematic V4.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IP5389 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers69.4 × 114.3 mm
- 2 layers70 × 122.3 mm
- 2 layers72 × 121.9 mm
- 2 layers60 × 40 mm
Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 4 layers102 × 86 mm
- 2 layers30 × 30 mm
- 2 layers46.5 × 32 mm
Half bridge load cells board
XuanTrace/half-bridge-load-cells-board
Open-source half-bridge load cell PCB design featuring the HX710A/B/C ADC chip. Supports SMD with castellation (half-hole), pin headers, and XH2.45 4-pin connectors.
46 parts1