
OpenCTD Rev8 PCB
OceanographyforEveryone/OpenCTD
The OpenCTD is a low-cost, open-source CTD for researchers and citizen scientists.

The OpenCTD is a low-cost, open-source CTD for researchers and citizen scientists.
Kicad openctd is an open-source printed circuit board by OceanographyforEveryone, from the OceanographyforEveryone/OpenCTD repository on GitHub, published under the MIT licence. It is a 2-layer board of 110 × 33 mm with 10 parts on 38 nets, routed with 101 tracks and 2 vias.
Its parts include 4 connectors, 3 resistors and 3 ICs.
The OpenCTD main board is designed using KiCad.
The current OpenCTD [blocked] uses the OpenCTD Rev8 control board [blocked]. Previous generation control boards are archived in Retired.
The Oceanography for Everyone Custom Pressure Sensor breakout board (Ofe_CPS) allows you to build an inexpensive version of the Sparkfun Breakout Board, but requires advanced soldering techniques.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | JST-PH7 | Connector_JST:JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal | J4 |
| 1 | RA pin header female | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | adafruit_ds3231 | local:Adafruit_DS3231_flipped_noholes | U1 |
| 1 | adafruit_feather | local:Adafruit_Feather_With2MountingHoles | U3 |
| 1 | atlas-ec | local:Atlas_EC | U2 |

OceanographyforEveryone/OpenCTD
The OpenCTD is a low-cost, open-source CTD for researchers and citizen scientists.

OceanographyforEveryone/OpenCTD
The OpenCTD is a low-cost, open-source CTD for researchers and citizen scientists.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 110 × 33 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OceanographyforEveryone/OpenCTD repository on GitHub, at the commit this page was made from: the board is Retired/OpenCTD_Rev6/PCB/kicad-openctd-rev6/kicad-openctd.kicad_pcb and its schematic Retired/OpenCTD_Rev6/PCB/kicad-openctd-rev6/kicad-openctd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).