Skip to the content
4 layersFoc pcb, the printed circuit board in 3D

brushed dc motor controller PCB 4 da doomba

Copper layers
4
Thickness
1.6 mm
Parts
88
Nets
73
Pads
348
Tracks, vias
487, 326
Pours
26
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
18 May 2026
Updated
4 Jun 2026

Overview

Foc pcb is an open-source printed circuit board by Ocanath, from the Ocanath/doomba-bdc-pcb repository on GitHub. It is a 4-layer board with 88 parts on 73 nets, routed with 487 tracks and 326 vias.

It is built around the STM32G431CBT6, DGD05473FNQ-7-52 and TPS63070RNM, with the DF52-4S-0.8H(21), ECS-1633-480-BN-TR and RBB06DHHN among its other parts. Its parts include 50 capacitors, 19 ICs, 13 resistors, 4 transistors and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

11

Parts

88
QtyValueFootprintReferences
2110uFfoc-pcb-library:C_1206_3216MetricC26, C27, C28, C29, C30, C31, C37, C38, C39, C40, C41, C42, C43, C44, C45, C47 +5
10100nFfoc-pcb-library:C_0402_1005MetricC3, C6, C8, C10, C19, C21, C32, C34, C55, C56
910uFfoc-pcb-library:C_0603_1608MetricC7, C9, C11, C18, C22, C23, C24, C25, C33
84.7uFfoc-pcb-library:C_0603_1608MetricC1, C4, C5, C12, C13, C15, C16, C20
410foc-pcb-library:R_0402_1005MetricR1, R2, R11, R12
4CSD18540Q5Bfoc-pcb-library:8-PowerTDFNQ1, Q2, Q7, Q8
4~foc-pcb-library:PowerHoleU11, U15, U19, U20
3~foc-pcb-library:SMD_PROG_PADU23, U24, U25
2100nFCapacitor_SMD:C_0402_1005MetricC51, C52
210kfoc-pcb-library:R_0402_1005MetricR5, R6
2DF52-4S-0.8H(21)foc-pcb-library:DF52-4S-0.8H(21)U17, U18
2INA241B4IDDFRfoc-pcb-library:SOT-23-8U3, U9
2PA2512FKF7T0R003Efoc-pcb-library:R_2512_6332MetricR3, R13
2UCC272847foc-pcb-library:DFN-10-GATEDRIVERU1, U8
1100kfoc-pcb-library:C_0402_1005MetricR10
1120foc-pcb-library:R_0402_1005MetricR9
11277AS-H-1R0M=P2foc-pcb-library:L_1210_3225MetricL1
1150kfoc-pcb-library:R_0402_1005MetricR15
1470foc-pcb-library:R_0402_1005MetricR4
1470kfoc-pcb-library:R_0402_1005MetricR14
1C2901617foc-pcb-library:ECS-1633-480-BN-TRU12
1LED Green 0603foc-pcb-library:LED_0603_1608MetricD1
1RBB06DHHNfoc-pcb-library:RBB06DHHNU5
1SPX3819M5-L-5-0foc-pcb-library:SOT-23-5U6
1STM32G431CBT6foc-pcb-library:LQFP48-STM32U2
1THVD2450VDRCRfoc-pcb-library:THVD2410VDRCRIC1
1TPS63070foc-pcb-library:VQFN-TPS63070U10

Similar boards

  • 4 layers27.5 × 35.8 mmRobot cortex, the printed circuit board in 3D

    Robot cortex

    Ocanath/robot-coprocessor-pcb

    ESP32+STM32 Coprocessor. Standalone, with vendored PCB design out of the old coprocessor repository

    91 parts
  • 4 layers70 × 50 mmFluxdrive g4, the printed circuit board in 3D

    Fluxdrive g4

    alanhpereira/fluxdrive-g4

    Firmware for my graduation thesis

    100 partsMIT
  • 6 layers68.9 × 47.5 mmMowi, the printed circuit board in 3D

    Mowi

    septentrio-gnss/mowi

    Mowi is an Open Source hardware project that combines a compact Septentrio's GNSS receiver mosaic with a wireless ESP32 Wrover module

    283 parts35
  • 4 layers90 × 100 mmPCB Cuarto, the printed circuit board in 3D

    PCB Cuarto

    Jose-WaitNRest/PCB-Cuarto

    79 parts
  • 4 layers90 × 100 mmPCB Madre, the printed circuit board in 3D

    PCB Madre

    Jose-WaitNRest/PCB-Madre

    64 parts
  • 2 layers100 × 65.9 mmFCI SAMD51-Universal Controller, the printed circuit board in 3D

    FCI SAMD51-Universal Controller

    libertathiest/FCI-SAMD51-Universal-Controller

    SAMD51 handheld controller for FCI flow meters: KiCad hardware, PlatformIO firmware, FreeCAD enclosure

    101 parts
  • 2 layers30 × 60 mmSplitFlapDriverATtiny1616V4, the printed circuit board in 3D

    SplitFlapDriverATtiny1616V4

    adamgmakes/SplitFlapDisplay

    A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.

    25 parts190

Questions

What parts does the Foc pcb use?

88 parts, built around the STM32G431CBT6, DGD05473FNQ-7-52, TPS63070RNM and DF52-4S-0.8H(21). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Foc pcb KiCad files?

From the Ocanath/doomba-bdc-pcb repository on GitHub, at the commit this page was made from: the board is foc-pcb.kicad_pcb and its schematic Encoder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Foc pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ocanath before reusing the design.