Skip to the content
2 layers52.7 × 51.4 mmESP8266 adapter, the printed circuit board in 3D

ESP8266 adapter

obertr0n/BoardsDesign

Some CAD PCBs

Size
52.7 × 51.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
25
Pads
95
Tracks, vias
183, 0
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20170123)
Created
15 Feb 2017
Updated
21 Feb 2017

Overview

ESP8266 adapter is an open-source printed circuit board by obertr0n, from the obertr0n/BoardsDesign repository on GitHub, published under the MIT licence. It is a 2-layer board of 52.7 × 51.4 mm with 14 parts on 25 nets, routed with 183 tracks and 0 vias.

It is built around the ESP-12E. Its parts include 6 connectors, 3 capacitors, 2 resistors, 2 ICs and 1 switch. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.

Main components

1

Parts

14
QtyValueFootprintReferences
210kResistors_SMD:R_1206_HandSolderingR1, R2
2PWRPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmP5, P6
11000uFCapacitors_THT:CP_Radial_D5.0mm_P2.50mmC2
1100nFCapacitors_ThroughHole:C_Disc_D7.0mm_W2.5mm_P5.00mmC3
1100uFCapacitors_THT:CP_Radial_D5.0mm_P2.50mmC1
1CONN_LEFTPin_Headers:Pin_Header_Straight_2x11_Pitch2.54mmP2
1CONN_RIGHTPin_Headers:Pin_Header_Straight_2x11_Pitch2.54mmP3
1ESP-12EESP8266:ESP-12EU2
1NCP1117DT33G_MountingTabTO_SOT_Packages_SMD:SOT-223U1
1PWRConnectors_Phoenix:PhoenixContact_MCV-G_02x5.08mm_VerticalP1
1RST_SWITCHButtons_Switches_THT:Push_E-Switch_KS01Q01SW1
1UART_PROGPin_Headers:Pin_Header_Straight_1x05_Pitch2.54mmP4

More from obertr0n/BoardsDesign

2
  • 2 layersNoname, the printed circuit board in 3D

    Noname

    obertr0n/BoardsDesign

    Some CAD PCBs

    9 partsMIT

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0
  • 2 layers25.6 × 23 mmBreakout, the printed circuit board in 3D

    Breakout

    skorokithakis/tiny-ESP8266-breakout

    A very small and basic ESP8266 breakout board

    12 parts115BSD-2-Clause
  • 2 layers104.8 × 72.1 mmSST V2 4, the printed circuit board in 3D

    SST V2 4

    mcbittech/souliss-smart-thermostat-WiFi

    ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

    53 parts110GPL-2.0
  • 2 layers30 × 65 mmHardpass pcb, the printed circuit board in 3D

    Hardpass pcb

    girst/hardpass-passwordmanager-mirror-of-git.gir.st

    https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.

    34 parts101GPL-3.0
  • 2 layers82.5 × 22.4 mmWindow Sensor, the printed circuit board in 3D

    Window Sensor

    MakerMeik/Window-Sensor

    Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w

    19 parts67
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layers100 × 45 mmTranspOtterNG, the printed circuit board in 3D

    TranspOtterNG

    Jana-Marie/transpOtterNG

    Next Generation of TranspOtter.

    63 parts51

Questions

How big is the ESP8266 adapter PCB?

It measures 52.7 × 51.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP8266 adapter use?

14 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP8266 adapter KiCad files?

From the obertr0n/BoardsDesign repository on GitHub, at the commit this page was made from: the board is KiCAD/Projects/ESP8266_adapter/ESP8266_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP8266 adapter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).