Skip to the content
2 layers48.3 × 84.2 mmESP IMU Board, the printed circuit board in 3D

Electrical 2025 for Oakland Robotics.

Size
48.3 × 84.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
66
Pads
201
Tracks, vias
253, 41
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Nov 2025
Updated
22 May 2026

Overview

ESP IMU Board is an open-source printed circuit board by oaklandrobotics, from the oaklandrobotics/electrical_ora25 repository on GitHub. It is a 2-layer board of 48.3 × 84.2 mm with 41 parts on 66 nets, routed with 253 tracks and 41 vias.

It is built around the ESP32-S3-WROOM-1-N8, BNO086 and TLV75733PDBVR-MS, with the AO3400A among its other parts. Its parts include 13 resistors, 10 capacitors, 4 connectors, 3 ICs and 3 diodes. It belongs with the sensors and measurement boards and the ESP32 boards of this library.

Main components

4

README

2025ConnectorBridgePCB/README.md

2025ConnectorBridgePCB

Parts

41
QtyValueFootprintReferences
6100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C7, C11, C12, C13, C14
510kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R5, R6, R9, R14
42.2kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8, R12, R13
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_TopBottomH1, H2, H3, H4
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6, C8
21uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
25.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2D_SchottkyDiode_SMD:D_2114_3652Metric_Pad1.85x3.75mm_HandSolderD2, D3
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
1220Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR11
15V_Barrel_JackConnector_BarrelJack:BarrelJack_CUI_PJ-063AH_HorizontalJ3
1AO3400APackage_TO_SOT_SMD:SOT-23Q2
1BNO086Sensor_Motion:IC_BNO086U3
1BootButton_Switch_SMD:SW_SPST_TL3342SW2
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U1
1EnableButton_Switch_SMD:SW_SPST_TL3342SW1
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1LOGOLogos:ORA_LogoG***
1LightTerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ5
1TLV75733PDBVRTLV75733PDBVR_SOT95P280X145-5N:TLV75733PDBVR_SOT95P280X145-5NU2
1UART_HeaderConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4085J4

More from oaklandrobotics/electrical_ora25

1
  • 2 layers95.5 × 80.5 mm2025ConnectorBridgePCB, the printed circuit board in 3D

    2025ConnectorBridgePCB

    oaklandrobotics/electrical_ora25

    Electrical 2025 for Oakland Robotics.

    11 parts

Similar boards

  • 4 layers92.5 × 101.6 mmVCU, the printed circuit board in 3D

    VCU

    formulaslug/fs-4-schematics

    Electrical Design Repository for fs-4 schematics and PCBs

    225 parts7
  • 4 layers34 × 86 mmMinisumo 2025, the printed circuit board in 3D

    Minisumo 2025

    alexivan04/Minisumo-PCB

    109 parts
  • 4 layers75 × 75 mmWeatherstation, the printed circuit board in 3D

    Weatherstation

    Stylt1/lora-weather-station-pcb

    Custom PCB for sensor node

    65 partsGPL-3.0
  • 4 layers89 × 78.4 mm0805JLC, the printed circuit board in 3D

    0805JLC

    h617265630/epd_esp32-pcb

    epd_esp32裸芯片电纸书pcb

    92 parts
  • 4 layers60 × 100 mmMIDAS MK1, the printed circuit board in 3D

    MIDAS MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    221 parts33
  • 6 layers100 × 60 mmAether, the printed circuit board in 3D

    Aether

    nasheed-x/aether

    Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

    180 parts10
  • 4 layers162.6 × 61.5 mmVersaSens HeEx, the printed circuit board in 3D

    VersaSens HeEx

    esl-epfl/VersaSens

    VersaSens: An Extendable Multimodal Platform for Next-Generation Edge-AI Wearables

    335 parts9
  • 4 layers76 × 121 mmBeta main, the printed circuit board in 3D

    Beta main

    BETA-KNH/beta

    Humanoid robot repository.

    93 parts5

Questions

How big is the ESP IMU Board PCB?

It measures 48.3 × 84.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP IMU Board use?

41 parts, built around the ESP32-S3-WROOM-1-N8, BNO086, TLV75733PDBVR-MS and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP IMU Board KiCad files?

From the oaklandrobotics/electrical_ora25 repository on GitHub, at the commit this page was made from: the board is ESP_IMU_PCB/ESP_IMU_Board/ESP_IMU_Board.kicad_pcb and its schematic 2025ConnectorBridgePCB/2025ConnectorBridgePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP IMU Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask oaklandrobotics before reusing the design.