2 layers48 × 33 mm
FrequencyGenerator
hieuxuanthuytran/Si5351C-Clock-Generator-Breakout-PCB
PCB files for the Si5351C Clock Generator Breakout
30 parts
2 layers96.5 × 88.9 mm
BirdEar
o7-machinehum/BirdEar1The training data was fetched from xeno-canto
- Size
- 96.5 × 88.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 140
- Pads
- 328
- Tracks, vias
- 395, 55
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Apr 2019
- Updated
- 3 Jun 2020
Overview
BirdEar is an open-source printed circuit board by o7-machinehum, from the o7-machinehum/BirdEar repository on GitHub. It is a 2-layer board of 96.5 × 88.9 mm with 62 parts on 140 nets, routed with 395 tracks and 55 vias.
It is built around the LM324, LTR-303ALS-01 and SI7050-A20-IM, with the AZ1117EH-3.3TRG1 and CMA-4544PF-W among its other parts. Its parts include 25 capacitors, 15 resistors, 7 connectors, 5 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
5
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
LTR-303ALS-01
DFN-6(2x2)-30℃~+70℃ 0.7mm 16bit 2.4V~3.6V 2mm 2mm 64klx I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、Adjustable gain control、Interrupt/event trigger、Built-in temperature compensation DFN-6(2x2) Ambient Light Sensors ROHSLite-OnAmbient Light Sensors
SI7050-A20-IM
SON6-40°C to +125°C, ±1°C, I2C Temperature Sensor (Address 1000 000)Silicon LabsUncategorised
AZ1117EH-3.3TRG1
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.1V@(1A) 13V 1A 3.3V 3.5mA 70dB@(120Hz)、70dB Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CMA-4544PF-W
--44dB@±2dB 2.2kΩ 3V~10V 4.65mm 500uA 60dB 9.7mm Omnidirectional 插件,D=9.7mm Microphones ROHSCUIBuzzers
README
README.mdBirdEar
Birdear is an open source hardware project that aims to build embedded hardware for classifying acoustic data. It uses and STM32 microcontoller, 18650 battery and a neural network build woth Tensorflow lite for Microcontrollers. It is designed to be inexpensive so several units can be placed cheaply.
The training data was fetched from xeno-canto
Repo Structure
├── birdEar # Hardware directory
├── NN # Directory pertaining to the neural net
├── README.md # This file
├── refs # Referance files
├── report # Report for the project
└── src # Source code for the firmware- Jin Seo / Ryan Walker
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C20, C24, C25 +5 |
| 5 | 47K | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R9 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric | R2, R3, R13, R14 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R10, R11, R12 |
| 3 | KSA0A311 LFTR | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW2, SW3, SW4 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 2 | 1M | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1, RV2 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J7 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 16k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C21 |
| 1 | AZ1117EH-3.3TRG1 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | CMA-4544PF-W | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | MK1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | LTR-303ALS-01 | OptoDevice:Lite-On_LTR-303ALS-01 | U5 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | STM32F746ZGTx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U3 |
| 1 | Si7050-A20 | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U4 |
Questions
How big is the BirdEar PCB?
It measures 96.5 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BirdEar use?
62 parts, built around the LM324, LTR-303ALS-01, SI7050-A20-IM and AZ1117EH-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BirdEar KiCad files?
From the o7-machinehum/BirdEar repository on GitHub, at the commit this page was made from: the board is birdEar/birdEar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BirdEar design in my own project?
Its repository states no licence, so its author keeps all rights: ask o7-machinehum before reusing the design.
Similar boards
- 4 layers51 × 48 mm
- 2 layers69 × 100 mm
- 4 layers36.5 × 94.1 mm
- 4 layers183.4 × 143.1 mm
- 4 layers100 × 100 mm
- 2 layers111.8 × 50.8 mm
Temp Control Board
mcupka/Temperature_Control_Board
ESP32-based control board for toaster oven PCB reflow project
39 parts1 - 2 layers75 × 35 mm
