
40+ pcb
nzge/input-peripherals
An investigation into the customization potential of input devices and their core functionality.

An investigation into the customization potential of input devices and their core functionality.
4x4 macro is an open-source printed circuit board by nzge, from the nzge/input-peripherals repository on GitHub. It is a 2-layer board of 76.2 × 76.2 mm with 33 parts on 42 nets, routed with 112 tracks and 4 vias.
Its parts include 16 diodes, 16 switches and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
An investigation into the customization potential of input devices and their core functionality.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | Keyswitch | MX_Alps_Hybrid:MX-Alps-Hybrid-1U | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16 |
| 1 | SuperMini nRF52840 | PCM_marbastlib-xp-promicroish:SuperMini_nRF52840_AH_USBup | U1 |

nzge/input-peripherals
An investigation into the customization potential of input devices and their core functionality.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 76.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nzge/input-peripherals repository on GitHub, at the commit this page was made from: the board is macropad/pcb 4x4 macro/4x4_macro/4x4_macro.kicad_pcb and its schematic _kicad-components/ScottoKicad/ScottoModules/STM32F072CBT6/ScottoModules.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nzge before reusing the design.