Skip to the content
2 layers55 × 110 mmDart launcher robot pcb, the printed circuit board in 3D

Dart launcher robot pcb

nusrobomaster/Dart-FYP

This respository is for the AY25/26 Dart FYP team

Size
55 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
41
Pads
138
Tracks, vias
193, 4
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Sep 2025
Updated
15 Apr 2026

Overview

Dart launcher robot pcb is an open-source printed circuit board by nusrobomaster, from the nusrobomaster/Dart-FYP repository on GitHub. It is a 2-layer board of 55 × 110 mm with 33 parts on 41 nets, routed with 193 tracks and 4 vias.

Its parts include 23 connectors, 3 resistors and 3 diodes. It belongs with the robots and motor control boards of this library.

README

README.md

🎯 FYP Dart Launcher (RoboMaster Competition)

This repository hosts the STM32 firmware for our Final Year Project (FYP), which focuses on building the dart launcher subsystem for the NUS RoboMaster competition robot. The project is developed and maintained using STM32CubeIDE with the DEV A environment, ensuring consistent toolchain and configuration across all team members.

🚀 Getting Started (STM32CubeIDE + DEV BOARD A)

Clone this repo and set this repo as your Workspace in stm32cubeide

Parts

33
QtyValueFootprintReferences
9705430037footprints_3:CONN_SDA-70543-xxxx_03_MOLJ4, J13, J14, J16, J17, J18, J19, J20, J21
6705430042footprints_3:CONN_SDA-70543-xxxx_08_MOLJ5, J6, J7, J8, J9, J10
3LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D4
3R_Small_USResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3
2705430009footprints_3:CONN_SDA-70543-xxxx_10_MOLJ1, J11
2705430036footprints_3:CONN_SDA-70543-xxxx_02_MOLJ22, J23
2705430038footprints_3:CONN_SDA-70543-xxxx_04_MOLJ12, J15
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2
1705430004footprints:CONN_SDA-70543-xxxx_05_MOLJ3
1705430011footprints_3:CONN_SDA-70543-xxxx_12_MOLJ2
1LOGOImages:fourth_hokageG***
1LOGOImages:monica_smallerG***

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the Dart launcher robot pcb PCB?

It measures 55 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dart launcher robot pcb use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dart launcher robot pcb KiCad files?

From the nusrobomaster/Dart-FYP repository on GitHub, at the commit this page was made from: the board is kicad_files/Dart_launcher_robot_pcb/Dart_launcher_robot_pcb.kicad_pcb and its schematic kicad_files/Dart_launcher_robot_pcb/Dart_launcher_robot_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dart launcher robot pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask nusrobomaster before reusing the design.