
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

This respository is for the AY25/26 Dart FYP team
Dart launcher robot pcb is an open-source printed circuit board by nusrobomaster, from the nusrobomaster/Dart-FYP repository on GitHub. It is a 2-layer board of 55 × 110 mm with 33 parts on 41 nets, routed with 193 tracks and 4 vias.
Its parts include 23 connectors, 3 resistors and 3 diodes. It belongs with the robots and motor control boards of this library.
This repository hosts the STM32 firmware for our Final Year Project (FYP), which focuses on building the dart launcher subsystem for the NUS RoboMaster competition robot. The project is developed and maintained using STM32CubeIDE with the DEV A environment, ensuring consistent toolchain and configuration across all team members.
Clone this repo and set this repo as your Workspace in stm32cubeide
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 705430037 | footprints_3:CONN_SDA-70543-xxxx_03_MOL | J4, J13, J14, J16, J17, J18, J19, J20, J21 |
| 6 | 705430042 | footprints_3:CONN_SDA-70543-xxxx_08_MOL | J5, J6, J7, J8, J9, J10 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D4 |
| 3 | R_Small_US | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 705430009 | footprints_3:CONN_SDA-70543-xxxx_10_MOL | J1, J11 |
| 2 | 705430036 | footprints_3:CONN_SDA-70543-xxxx_02_MOL | J22, J23 |
| 2 | 705430038 | footprints_3:CONN_SDA-70543-xxxx_04_MOL | J12, J15 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 705430004 | footprints:CONN_SDA-70543-xxxx_05_MOL | J3 |
| 1 | 705430011 | footprints_3:CONN_SDA-70543-xxxx_12_MOL | J2 |
| 1 | LOGO | Images:fourth_hokage | G*** |
| 1 | LOGO | Images:monica_smaller | G*** |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 55 × 110 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nusrobomaster/Dart-FYP repository on GitHub, at the commit this page was made from: the board is kicad_files/Dart_launcher_robot_pcb/Dart_launcher_robot_pcb.kicad_pcb and its schematic kicad_files/Dart_launcher_robot_pcb/Dart_launcher_robot_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nusrobomaster before reusing the design.